Belt Sander Shields

These high-quality, adjustable belt sander shields place a barrier between an operator and flying debris generated at the point of operation. They fasten directly to the machine using 1" x 2" extruded aluminum with mounting hardware included. The transparent portion of the shield is constructed of high-impact-resistant, 3/16"-thick clear polycarbonate. Easy vertical adjustment of the shields is achieved simply by loosening and tightening the black knobs.

Disc sander shields are also available for use on a combination belt sander & disc sander.

You may also want to see our Sensing-Saf-Start® Package.

Upper Belt Sander Shield Assembly

Upper Belt Sander Shield

Upper Belt Sander Shield Ordering Information

Part #	Description	Price
KYL-226	UPPER BELT SHIELD ASSEMBLY (L-SHAPED SHIELD)	$170.00
KYL-227	UPPER BELT SHIELD ONLY (L-SHAPED)	$60.00
FKT-083	T-HANDLE KNOB	$5.00

Lower Belt Sander Shield Assembly

Lower Belt Sander Shield

Lower Belt Sander Shield Ordering Info

Part #		Description		Price		Qty.
KYL-224		LOWER BELT SHIELD ASSEMBLY (6" X 8" SHIELD)		$45.00
KYL-225		LOWER BELT SHIELD ONLY (6" X 8")		$20.00

Disc Sander Shield Assembly

Disc Sander Shield Assembly Ordering Info

Part #	Description	Price
KYL-228	9" DISC SANDER SHIELD ASSEMBLY (6" X 13" SHIELD)	$245.00
KYL-230	12" DISC SANDER SHIELD ASSEMBLY (7" X 16" SHIELD)	$250.00
KYL-232	16" DISC SANDER SHIELD ASSEMBLY (9" X 20" SHIELD)	$260.00
KYL-234	20" DISC SANDER SHIELD ASSEMBLY (11" X 24" SHIELD)	$270.00
KYL-236	24" DISC SANDER SHIELD ASSEMBLY (13" X 28" SHIELD)	$285.00

Disc Sander Replacement Parts Ordering Info

Part #	Description	Price
KYL-229	9" DISC SANDER SHIELD ONLY (6" X 13")	$25.00
KYL-231	12" DISC SANDER SHIELD ONLY (7" X 16")	$30.00
KYL-233	16" DISC SANDER SHIELD ONLY (9" X 20")	$40.00
KYL-235	20" DISC SANDER SHIELD ONLY (11" X 24")	$50.00
KYL-237	24" DISC SANDER SHIELD ONLY (13" X 28")	$60.00
FKT-083	T-HANDLE KNOB	$5.00

Recommended

This Sensing-Saf-Start® package (SAFS-200) is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the Saf-Start® package will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset button on the Saf-Start® pushed.

The package includes a 120-V AC Sensing-Saf-Start® with a 20" cord for the machine end and an 8' cord with molded plug on the power end, plus an E-stop in a Nema 4 polycarbonate enclosure. The Saf-Start® complies with OSHA requirements, NFPA 79 electrical standard, and CSA standards.

This one-box SAFS-300 is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the SAFS-300 will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset button pushed.

The SAFS-300 is housed in a Nema 4 polycarbonate enclosure and includes a reset button and E-stop. The Saf-Start® complies with OSHA requirements, NFPA 79 electrical standard, and CSA standards.

Ordering Info

Part #		Description		Price		Qty.
SAFS-200		COMBINATION SENSING-SAF-START® AND E-STOP PACKAGE		$360.00
SAFS-300		ONE-BOX SENSING-SAF-START® WITH RESET BUTTON AND E-STOP		$280.00