Table Saw Shield Assembly

Table Saw Shield in operation with push stick

This table saw shield is designed to enclose the portion of the saw above the table and enclose the portion of the saw above the material being cut. It is also designed so that the shield will automatically adjust itself to the thickness of and remain in contact with the material being cut—OSHA 1910.213 (c)(1).

The table saw shield assembly consists of a durable clear 3/16"-thick polycarbonate, a spreader, and anti-kickback pawls—OSHA 1910.213 (c)(2)(3). An extruded aluminum arm and steel mounting brackets support the assembly. The mounting brackets have slotted holes that provide adjustable mounting heights.

OSHA 1910.213 (a)(10) also recommends that each power-driven woodworking machine be provided with a disconnect switch that can be locked in the off position.

You may also want to see our Sensing-Saf-Start® Package.

Table Saw Shield Assembly

Ordering Information—Table Saw Shield Assembly

View Product Manual
Part #   Description   Price   Qty.    

Recommended

Rockford Systems Sensing-Saf-Start®

This Sensing-Saf-Start® package (SAFS-200) is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the Saf-Start® package will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset button on the Saf-Start® pushed.

The package includes a 120-V AC Sensing-Saf-Start® with a 20" cord for the machine end and an 8' cord with molded plug on the power end, plus an E-stop in a Nema 4 polycarbonate enclosure. The Saf-Start® complies with OSHA requirements, NFPA 79 electrical standard, and CSA standards.

Rockford Systems Sensing-Saf-Start®

 

This one-box SAFS-300 is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the SAFS-300 will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset button pushed.

The SAFS-300 is housed in a Nema 4 polycarbonate enclosure and includes a reset button and E-stop. The Saf-Start® complies with OSHA requirements, NFPA 79 electrical standard, and CSA standards.

 

Ordering Information

Part #   Description   Price   Qty.    
SAFS-200   COMBINATION SENSING-SAF-START® AND E-STOP PACKAGE   $378.00    
SAFS-300   ONE-BOX SENSING-SAF-START® WITH RESET BUTTON AND E-STOP   $294.00    
The products and photos on this site are carefully checked for accuracy; however some cosmetic differences may occur.