Showing 1–24 of 31 results

  • Ejection Curtain Guarding Kits for Presses

    $3,153.76$3,696.97

    Ejection Curtain Guarding Kits for Presses are designed for organizations that require a superior hydraulic press safety solution to help protect their employees and prevent injuries caused by flying, rolling or sliding debris. Most commonly used on H-presses or compacting presses that are hydraulic powered, the ejection curtains are coiled-wire fabric machine guards, widely used…

  • Chip Shields For Bridgeport Milling Machines

    KYL019 Replacement Shield Equivalents

    $726.51$2,352.46

    THE PROTECTOR™ SERIES SHIELDS The Milling Machine Chip Shields will be supported and supplied through January 1, 2024, or until inventory is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered in curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements…

  • Chip Shields For Bridgeport Milling Machines

    KYL059 Replacement Shield Equivalents

    $794.38$2,715.99

    THE PROTECTOR™ SERIES SHIELDS The Milling Machine Chip Shields will be supported and supplied through January 1, 2024, or until inventory is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered in curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements…

  • LXS300 Series Replacement Shield Equivalents

    $288.87$1,344.97

    THE PROTECTOR™ SERIES SHIELDS The LXS Series Shield will be discontinued when the current stock is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered as curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements for the LXS300 Shields.   BASIC…

  • LXS500 Series Replacement Shield Equivalents

    $329.73$1,467.38

    THE PROTECTOR™ SERIES SHIELDS The LXS Series Shield will be discontinued when the current stock is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered as curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements for the LXS500 Shields.   BASIC…

  • LXS600 Series Replacement Shield Equivalents

    $353.27$1,532.08

    THE PROTECTOR™ SERIES SHIELDS The LXS Series Shield will be discontinued when the current stock is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered as curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements for the LXS600 Shields.   BASIC…

  • Machine Guards and Bearing Covers

  • UNITROL SOFT TOUCH SAFETY SYSTEM

    Unitrol SOFT TOUCH Pinch-Point Safety System for Riveters

    $7,474.38

    Please note this item has an extended lead time (about 4 weeks). Please call for installation quote if interested in Rockford Systems installation. The SOFT TOUCH Pinch-Point Safety System is the first and only fully passive safeguarding equipment designed to prevent a pneumatic riveter, welder or other small machine from applying full force if it…

  • Automatic Sanding Belt Holder

    $3,533.49$4,130.75

    The automatic sanding belt holder enables lathe operators to sand, polish and deburr without using their hands for work execution, keeping hands away at a safe operating distance. The holder is available in 25mm and 50mm sizes and can hold belts of different sizes and abrasion grits. The sanding belt holder meets ISO 23125 6.2.1.P…

  • Sanding Belts for Automatic Sanding Belt Holder

    Sanding Belts for Automatic Sanding Belt Holder

    $22.09

    Sanding belts for the automatic sanding belt holder enables lathe operators to sand, polish and deburr without using their hands for work execution, keeping hands away at a safe operating distance.

  • Control System Cordset - Patchcord

    Modular Emergency Stop Control System – Patch Cords

    $114.71$166.13

    The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…

  • Modular Emergency Stop Control System – Terminating Cable (FDK316)

    $65.92

    The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…

  • Modular Emergency Stop Control System – Wired Push Button Station

    $465.42$548.49

    The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…

  • Transparent Lathe Chuck Shields

    Transparent Lathe Chuck Shields

    $358.62$742.56

    NOTE:
    LXS Series Lathe Chuck Shields are *Marked for Discontinuation* until inventory is depleted. Replacement transparent shields and mounting arms will be supported and supplied through January 1, 2024 or until inventory is depleted.

    Replacement Lathe Chuck Shields for LXS Series are the Protector™ Series Shields:
    Please see the links below for direct replacement options. Offered as curved, octagonal, interlocked, and interlocked and lighted.

  • Small Steel Lathe Chuck Shields

    Small, Steel, Lathe Chuck Shields

    $651.32$842.50

    These sturdily constructed small steel lathe chuck shields are fabricated of 18-gauge steel with reinforced sides and can be used on smaller lathes that have up to 18 1/2″ diameter chucks. Each shield is furnished with a 1″ x 13″ mounting rod which can be cut to length if required. This mounting rod is fastened…

  • Large Steel Lathe Chuck Shields

    Large Steel Lathe Chuck Shields

    $1,946.06$4,195.35

    The large steel lathe chuck shields are made of fabricated 18-gauge steel with reinforced sides. They can be used on lathes that have chucks up to 47-inches in diameter. They are double hinged for access to the chuck, workpiece, and tool. The front hinged portion can be swung up for workpiece changes, and the entire…

  • Crosslide-Travel Lathe Shields

    Crosslide-Travel Lathe Shields With Reinforced Steel and High-Impact Polycarbonate Window

    $776.57$1,100.92

    These crosslide-travel lathe shields mount on and travel with the crosslide for protection when machining long workpieces. The 18-guage reinforced steel housing provides protection from flying chips and coolant. The high-impact polycarbonate window permits visibility into the point of operation. The front portion of the lathe shield hinges up for access. These shields are ideal…

  • Sliding Lathe Shields

    Sliding Lathe Shields

    $3,665.33$4,776.80

    Heavy-duty sliding lathe shields are furnished in four different sizes. They are constructed of high quality, reinforced 12-gauge steel with a polycarbonate window. These shields are available for operator protection on large standard lathes, CNC machines, and OD grinders. The shields are designed to fit lathes with chucks up to 48 inches in diameter. Four…

  • Flexible-Arm Safety Chip Shields - Direct Mount

    Safety Chip Shields with Direct-Mount Flexible Arm

    $158.21$375.76

    The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…

  • Flexible-Arm Safety Chip Shields - Magnet Mount

    Safety Chip Shields with Magnetic-Mount Flexible Arm

    $195.14$414.00

    The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…

  • Cable and Push-Button E-Stop Assembly (CML510)

    $1,267.04

    CML510 Assembly Includes:
    • Cable and Push-Button E-Stop Switch
    • Indicator Light and Bulb
    • 7 Yards of Red PVC-Covered Steel Cable
    • Tension Kit

  • Mounting Brackets for Lathe Chuck Shields

    $76.47$275.55

    The zinc-plated extension tube, to which the polycarbonate and steel shields are fastened, is mounted to the headstock of the lathe by a mounting bracket. There are two principal types of mounting brackets available. Type A is used for mounting to the top or the side of the headstock. Type B is used for mounting…

  • On Off Magnet-Base Shields

    On/Off Magnetic-Base Shields

    $647.37$829.32

    These versatile On-Off magnet-base shields can be used on lathes, drills, mills, grinders, or any equipment that has a flat, ferrous mounting surface. The heavy-duty magnetic base is 2 3/4-inch square with a V-groove and measures 3-inches high. The 200-lb holding force keeps the shield in place when the magnet is on. If an adequate…

  • portable welding screen and grinding station screen

    Portable Welding Screen and Grinding Station Screen (PTS01200)

    $2,435.20

    This portable welding screen offers protection for personnel who are in the area of welding and grinding work zones. The .4 mm-thick, semi-transparent PVC screen protects personnel from metal chips and sparks produced during the welding and/or grinding process. The red PVC screen pulls out easily from the mobile stand and attaches to a center…