Showing 1–24 of 154 results
-

$456.85 – $1,186.35
NEW Protector™ Series Mirrors are used to guard the perimeter of a work cell, whereby corner mirrors can be set up to reflect the sensing field from the emitter, around the perimeter’s corners, to the receiver. Using corner mirrors is an economical way to make use of the range of a PROTECTOR Series Light Curtains…
-

-

$104.42 – $114.58
These lockout devices accommodate a large variety of electrical plugs. The large device (Part No. KYM-987) also locks out necked-down pneumatic male fittings commonly attached to compressed air hoses. These devices accommodate up to four padlocks with 9/32″ maximum shackle diameter. Part No. KYM-984 is for plugs up to 1 1/2″ wide, 1 1/2″ high,…
-

-

-

$37.71
The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. OSHA 29 CFR 1910.215…
-

$62.36
The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. The bench grinder gauge…
-

$572.87
This heavy-duty, light-push, single plunger run/inch palm button provides 1 NO and 1 NC contact arrangement. This 2 1/2″ button is constructed of zinc cast and has a flat plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. This palm button can be used instead of…
-

$18.49
The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
-

$33.36
Danger Signs For Cutting and Turning Machinery are designed for Visual Danger Awareness Signs are available in English, Spanish and French.
-

$33.36
Danger Sign for Robots, Visual Safety Tool (KSC071-KSC071S) These visual safety tools raise awareness in the workplace about the danger of robots in nearby proximity. These signs are available in English and Spanish. Ex. “You are exposed to moving robot parts that can crush, dismember, and cause death.”
-

$18.49
Danger Signs for Closing Ram and Die signs are designed for Visual Danger Awareness. Signs are available in English, Spanish and French. “You are exposed to moving machine parts that can crush, dismember or cause death.”
-

$388.69
The N.O. Manual Start Switch is designed to be compatible with a large variety of practical machinery application needs.
-

$143.57
A deadbolt latch is ideal for holding guard doors closed. This spring-loaded deadbolt is made of anodized aluminum. A socket-head locking set-screw located towards the end of the latch requires the use of a tool to open the guard. This feature complies with OSHA 29 CFR 1910.217 (c)(2)(d). This deadbolt with side latch includes all…
-

$182.74 – $429.29
These die safety block holders are designed to accept U-shaped, octagonal, X-shaped, and adjustable safety blocks. They are constructed of heavy-gauge steel and painted safety orange. The holders attach easily to the machine with two 1/4-inch fasteners. A strap is furnished with each holder to keep the block in place. Safety wedges can also be…
-

$19.22
The Die Safety Block Warning Labels (KST323-KST323S) These visual safety tools are designed as visual safety tools to raise awareness of the dangers of die safety blocks nearby. These signs are available in English and Spanish.
-

$166.79 – $1,029.72
.embed-container { position: relative; padding-bottom:56.25%; height:0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%;}
-

$1,096.44
DIN-Rail Mounted Control Multi-Mode Module (RFT139) If the safety mat control box (Part No. RKR-162) is not required, a DIN-rail mounted control module is available. Each control module has 4 NO safety contacts and 1 NC auxiliary contact. The control module allows operation in either automatic or manual reset modes.
-

$25.38
Plastic, Direct T-Slot Frame, Door Handle (TXS101) – The plastic door handle is ideal for T-slot frame doors on guards or shields. Handles bolt directly to doors and panels using two 1/4-20 screws and two T-nuts (sold separately). The handle is made of high-strength black polycarbonate and is corrosion-resistant. When ordering a plastic door handle,…
-

$39.15
Aluminum, Direct Two-Bolt, Door Stopper (FKT595) – The door stop is made of aluminum and bolts directly to doors using two 1/4-20 screws and two T-nuts (sold separately). BHCS14C.5FCSB8 – 1/4-20 screw FSY028 – t-nut
-

$184.18 – $211.74
Convenient Handled, Double-Cup Sheet Metal Lifters These lifters have a convenient handle for one- or two-handed lifting. Positive grip increases the operator’s working capacity. Dual trigger valves disengage the lifter from material. The 3″ cups lift about 30 pounds; the 4″ cups about 50 pounds; and the 5″ cups about 75 pounds.
-

$2,240.72 – $8,491.57
These monitored dual solenoid air valves are ideal to use on mechanical power presses and other potentially hazardous machinery that utilize a pneumatically controlled clutch and brake mechanism. Each valve has two valve elements independently controlled by two solenoid pilots. The two valve elements share common inlet, outlet, and exhaust ports. When the pilot valves…
-

$684.55
An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…