Showing 49–72 of 155 results
-
Function-Testing Checklist for Restraint Devices (LLL065)
$15.49Restraint devices should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This restraint device function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine.
-
Function-Testing Checklist for Two-Hand Control and Two-Hand Trip
$15.49Before operating a machine with two-hand control or two-hand trip, function tests should be done to make sure that the safeguard is adjusted and working properly. These tests should be done at every setup, operator, and shift change, as well as every time after maintenance is performed. This two-hand control and two-hand trip function-testing checklist…
-
Danger Signs for General Machinery Danger
$30.33General Danger Signs for All Machinery are designed to alert of machine danger. Signs available in English, Spanish and French.
-
General Metal-Forming Machine Signs (KSC054-KSC054S)
$30.33The General Metal-Forming Machine Signs (KSC054-KSC054S) are designed for visual awareness and are produced in English and Spanish.
-
Guard-Opening Scale – ANSI / CSA (KSC098)
$52.74An ANSI and CSA guard opening scale is a valuable tool to use during the design, installation, and inspection of guards to make sure they comply with ANSI and CSA safety standards. This folding guard opening scale is based on “A Review of Machine-Guarding Recommendations” by Donald R. Vaillancourt and Stover H. Snook of the…
-
Guard-Opening Scale – OSHA (KSC097)
$52.74An OSHA guard opening scale is a valuable tool to use during the design, installation, and inspection of guards to make sure they comply with OSHA’s Table O-10. This folding guard opening scale is based on Table O-10 of OSHA 29 CFR 1910.217 for mechanical power presses. It shows the distances that guards shall be…
-
EX-AL™ Hairpin Clip Assembly for Perimeter Guarding (FKT753)
$6.60The Hairpin Clip Assembly for Perimeter Guarding (FKT753) is designed for holding the hairpin ends and are essential in appropriate hairpin assembly.
-
Bushing Hand Feeding Tools
$166.13Machine Safety Hand Feeding Tools for Bushings, Presses, etc. For over 45 years, our machine safety hand feeding tools have been a mainstay for operator safety when using mechanical power presses and other metal fabrication machines. OSHA recognizes the use of such hand tools and notes that they should be used in conjunction with appropriate…
-
Handled Vacuum Cup Lifters
$167.44 – $267.65These lifters can be used to place and remove material in and from the machine. These tools are not to be used as a point-of-operation safeguard, but can be used to help keep the operator’s hands out of the point of operation when loading parts. These lifters have strengthened steel rods and oil-resistant flexible vacuum…
-
Hazardous Voltage Warning Labels
$16.81The Hazardous Voltage Warning Labels, Visual Safety Technique are designed to be eye-catching and alert to the hazardous voltage in the work space.
-
Heavy-Duty Sheet Metal Lifters
$148.98 – $152.95Heavy-Duty Sheet Metal Lifters with Powerful Suction These lifters have powerful suction to lift heavier loads. A handy trigger-valve release disengages the vacuum lifter instantly and safely. This saves wear and tear on gloves and hands. These lifters are generally used for loading, unloading, piling, and shifting sheet metal from trucks, stock, etc. The 3″…
-
In-Line Actuator (CMC558A)
$121.30A linear actuator is designed for those applications where the mounting envelope dictates that the motor is to be in line with the ball screw. Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Knuckle-Saver Vacuum Lifter (KMK008)
$21.43Knuckle-Saver Ergonomic Vacuum Lifter is a two-finger grip with larger cup to provide extra lifting capacity. The larger diameter (3 1/4″) makes this lifter ideal for greater loads. Breaks oil adhesions easily. It also has specially designed release tabs. Lifts about 10 pounds.
-
-
-
Die Safety Block Lifting Handle (KTS633)
$90.98Convenient Lifting Handle for Die Safety Blocks (KTS633) The aluminum lifting handle is a convenient option for all safety blocks that are used frequently. To learn more about die blocks, we invite you to read our blog post “Demystifying Die Safety Blocks.” Product Manual Download the Product Manual PDF
-
Light Curtain (Beam) Off-On Remote Operator Station (LLD1236)
$320.39An off-on remote operator station is available that is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes an off/on keyed selector switch in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.
-
Light Curtain Floor Stand (KTR077)
$775.25This is a non-stock item and may incur an extended delivery time.
-
Light Curtain Interface for Point of Operation (EZ) Light Curtains
$709.33 – $2,745.04The EZ-Screen light curtain interfaces are available in several variations. They are available with the components furnished loose, in a plain door enclosure, or in an enclosure with the operators on the door. Depending on the requirements, component options include terminals, fuses, a safety monitoring relay, force-guided relays, a light curtain off/on selector switch, a…
-
Light Curtain Mirrors For Light Curtains
$537.94 – $1,906.50Light curtain mirrors can be used with the light curtain to protect more than one side of the point of operation or work envelope. The mirrors for light curtains can help protect two, three, and even four sides of the point of operation or perimeter area. They are usually mounted on a 45-degree angle at…
-
Light Curtain Off-On With Reset Remote Operator Station (LLD1238)
$441.68The light curtain off-on with reset remote operator station is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes an off/on keyed selector switch and a light curtain reset button in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.
-
Light Curtain Reset Remote Operator Station (LLD1237)
$287.43The light curtain reset remote operator station is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes a light curtain reset button in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.
-
Light Curtain Test Rods for Light Curtain Systems
$48.79Light curtain test rods for light curtain systems must be used to test the light curtain after each setup or after any maintenance work is performed. A test rod is included with each shipment of a light curtain system.
-
Little-Grabber Lifter
$16.81These one-finger lifters are ideal for light objects or raising corners for better grip. Always handy and ready for use, yet leaves one hand free for other work. It has specially designed release tabs. Made from tough rubber compound. Part No. KMK007 2 1/8″ diameter (1″ finger loop) — Lifts 4 lbs Part No. KMK056…
