Warning Label for High Voltage (KST194)
$19.78The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
Showing 73–96 of 215 results
The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
Danger Signs For Cutting and Turning Machinery are designed for Visual Danger Awareness Signs are available in English, Spanish and French.
Danger Sign for Robots, Visual Safety Tool (KSC071-KSC071S) These visual safety tools raise awareness in the workplace about the danger of robots in nearby proximity. These signs are available in English and Spanish. Ex. “You are exposed to moving robot parts that can crush, dismember, and cause death.”
Danger Signs for Closing Ram and Die signs are designed for Visual Danger Awareness. Signs are available in English, Spanish and French. “You are exposed to moving machine parts that can crush, dismember or cause death.”
The N.O. Manual Start Switch is designed to be compatible with a large variety of practical machinery application needs.
A deadbolt latch is ideal for holding guard doors closed. This spring-loaded deadbolt is made of anodized aluminum. A socket-head locking set-screw located towards the end of the latch requires the use of a tool to open the guard. This feature complies with OSHA 29 CFR 1910.217 (c)(2)(d). This deadbolt with side latch includes all…
These die safety block holders are designed to accept U-shaped, octagonal, X-shaped, and adjustable safety blocks. They are constructed of heavy-gauge steel and painted safety orange. The holders attach easily to the machine with two 1/4-inch fasteners. A strap is furnished with each holder to keep the block in place. Safety wedges can also be…
The Die Safety Block Warning Labels (KST323-KST323S) These visual safety tools are designed as visual safety tools to raise awareness of the dangers of die safety blocks nearby. These signs are available in English and Spanish.
.embed-container { position: relative; padding-bottom:56.25%; height:0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%;}
DIN-Rail Mounted Control Multi-Mode Module (RFT139) If the safety mat control box (Part No. RKR-162) is not required, a DIN-rail mounted control module is available. Each control module has 4 NO safety contacts and 1 NC auxiliary contact. The control module allows operation in either automatic or manual reset modes.
Plastic, Direct T-Slot Frame, Door Handle (TXS101) – The plastic door handle is ideal for T-slot frame doors on guards or shields. Handles bolt directly to doors and panels using two 1/4-20 screws and two T-nuts (sold separately). The handle is made of high-strength black polycarbonate and is corrosion-resistant. When ordering a plastic door handle,…
Aluminum, Direct Two-Bolt, Door Stopper (FKT595) – The door stop is made of aluminum and bolts directly to doors using two 1/4-20 screws and two T-nuts (sold separately). BHCS14C.5FCSB8 – 1/4-20 screw FSY028 – t-nut
Convenient Handled, Double-Cup Sheet Metal Lifters These lifters have a convenient handle for one- or two-handed lifting. Positive grip increases the operator’s working capacity. Dual trigger valves disengage the lifter from material. The 3″ cups lift about 30 pounds; the 4″ cups about 50 pounds; and the 5″ cups about 75 pounds.
These monitored dual solenoid air valves are ideal to use on mechanical power presses and other potentially hazardous machinery that utilize a pneumatically controlled clutch and brake mechanism. Each valve has two valve elements independently controlled by two solenoid pilots. The two valve elements share common inlet, outlet, and exhaust ports. When the pilot valves…
An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
This lockout container can lock out plugs up to 3″ wide and 5 1/2″ long with a maximum cord diameter of 1 1/4″. The lockout consists of a round container and two cover plates made of a durable and chemically resistant thermoplastic. The cover plates, when used singularly or combined, are locked to produce a…
Two Step Close, Slide Assembly, Electrical Plug-out This lockout container accepts lockout plugs up to 2 3/4″ wide and 4 3/4″ long with a maximum cord diameter of 2 3/4″. It is constructed of high-impact, yellow UV-stabilized polymer. It has an easy to use two-step close and slide assembly. It allows the use of four…
An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
Energy Source Attachment ID Tags for Hazard Awareness These tags can be used to identify the different hazardous energy sources associated with machinery throughout a plant or factory. They can be permanently or temporarily attached at the energy source. These tags can be used in conjunction with a company’s energy control program. All tags are…
THIS PRODUCT HAS A 10-DAY LEAD TIME The FKT301 is designed to be used with the ergonomic Safeball palm button (CTC773). It is a flexible ball joint mount that offers tilt and rotation for increased ergonomic support.
Hinges are used to swing guard panels and segments to the right or left. They are attached to the aluminum extrusion anywhere along the T-slot with button-head or socket-head cap screws and T-nuts (furnished). Standard aluminum hinges and lift-off hinges are available. This specially designed hinge assembly is used on the light curtain swing-away mounting…
A variety of brackets, plates, clamps, bolts, bearings, rollers, etc., are available for attaching guards to machines and for guard assemblies. Joining plates are used to connect extruded panels without additional machining. Joining strips and plates are used to connect extrusions to one another or to machines. The standard sizes of most of these mounting…
Linear bearings and channel guides are used in applications such as sliding panels or gates. These cost-effective alternatives to traditional bearings can be used in both low and high acceleration/deceleration applications. Linear bearings mate and glide on T-Slot aluminum extrusion profiles and the bearing pads are self-lubricating for smooth linear motion.
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
Copyright 2024. All Rights Reserved By Rockford Systems LLC
Rockford Combustion Solutions provides fuel-train management and combustion-safety solutions for safety-conscious organizations that work with fuel-fired equipment in thermal processes.
Rockford Combustion
5795 Logistics Parkway
Rockford, Illinois USA 61109