Showing 97–120 of 215 results
-
$27.16 – $103.96
Mounting brackets are used for attaching extrusion-constructed guards to one another or to machines. The standard sizes of most of these mounting brackets are .188 thick 6063 aluminum alloy, clear anodized with .257 diameter holes on 1.0″ center lines.
-
$32.98
The panel retainer holds mesh in the extruded-aluminum framework of the guard. This retainer prevents panel push out and is the strongest way to hold panels in place.
-
$41.89 – $43.45
The T-handle hex wrench is an ideal way to tighten and loosen button-head cap screws and socket-head cap screws. The handle has a cushion grip and the long arm (approx. 7 1/8″ arm / 9″ total w/handle) provides access to hard to reach areas. The end of the hex wrench is ball-shaped which allows for…
-
$0.59 – $16.29
EX-ALâ„¢ Various T-Nuts, Fasteners and End Caps T-nuts allow joining plates, panels, hinges, and other accessories to be bolted into the T-slot of any of the extrusions. They are made of hardened steel and are coated with corrosion-resistant black oxide. Standard T-nuts slide into the T-slot from the end. The drop-in style allows the T-nut…
-
$62.07
This mounting bracket is designed to stabilize the 18-inch x 6-inch bench grinder shield.
-
$187.76
Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
$242.09
Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
$19.78
Flywheel Rotation Sign for Visual Danger Attention The Flywheel Rotation Sign for Visual Danger Attention are danger signs for flywheel rotation. Includes arrow pointing to flywheel danger.
-
$35.70
The Foot Switch Signs and Labels are designed for visual awareness and are available in English, Spanish and French.
-
$18.23
Light curtains should be function-tested often using the function-testing checklist at every setup, operator change, and shift change, as well as every time after maintenance is performed. This light curtain function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine….
-
$18.23
This checklist can be used to function-test perimeter barrier guards. This should be done at every setup, operator, and shift change, as well as every time after maintenance is performed. The checklist is laminated and has a grommet in the corner so it can be attached to the barrier guard. The function-testing procedures are on…
-
$18.23
Barrier guards should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This point-of-operation barrier guard function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine. The checklist has the function-testing…
-
$18.23
Pullback devices should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This pullback device function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine.
-
$18.23
Restraint devices should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This restraint device function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine.
-
$18.23
Before operating a machine with two-hand control or two-hand trip, function tests should be done to make sure that the safeguard is adjusted and working properly. These tests should be done at every setup, operator, and shift change, as well as every time after maintenance is performed. This two-hand control and two-hand trip function-testing checklist…
-
$35.70
General Danger Signs for All Machinery are designed to alert of machine danger. Signs available in English, Spanish and French.
-
$35.70
The General Metal-Forming Machine Signs (KSC054-KSC054S) are designed for visual awareness and are produced in English and Spanish.
-
$62.07
An ANSI and CSA guard opening scale is a valuable tool to use during the design, installation, and inspection of guards to make sure they comply with ANSI and CSA safety standards. This folding guard opening scale is based on “A Review of Machine-Guarding Recommendations” by Donald R. Vaillancourt and Stover H. Snook of the…
-
$62.07
An OSHA guard opening scale is a valuable tool to use during the design, installation, and inspection of guards to make sure they comply with OSHA’s Table O-10. This folding guard opening scale is based on Table O-10 of OSHA 29 CFR 1910.217 for mechanical power presses. It shows the distances that guards shall be…
-
$7.77
The Hairpin Clip Assembly for Perimeter Guarding (FKT753) is designed for holding the hairpin ends and are essential in appropriate hairpin assembly.
-
$195.53
Machine Safety Hand Feeding Tools for Bushings, Presses, etc. For over 45 years, our machine safety hand feeding tools have been a mainstay for operator safety when using mechanical power presses and other metal fabrication machines. OSHA recognizes the use of such hand tools and notes that they should be used in conjunction with appropriate…
-
$197.07 – $315.03
These lifters can be used to place and remove material in and from the machine. These tools are not to be used as a point-of-operation safeguard, but can be used to help keep the operator’s hands out of the point of operation when loading parts. These lifters have strengthened steel rods and oil-resistant flexible vacuum…
-
$19.78
The Hazardous Voltage Warning Labels, Visual Safety Technique are designed to be eye-catching and alert to the hazardous voltage in the work space.