Showing 121–144 of 155 results
-
Safety Distance Guide Slide Chart
$23.07This slide chart calculates the safety distance for mounting two-hand trip, two-hand control, and presence-sensing devices on machinery.
-
-
Safety Mat Junction Boxes
$1,019.18 – $1,255.17Safety Mat Junction Boxes with Easy Tie-In for Grouping up to 10 safety mats. Part No. RKR-021 Mat junction box can provide wiring for up to 10 mats for easy tie-in to the mat control. (Cover has been removed for photo.) If multiple mats are grouped together to provide auxiliary or perimeter (work-envelope) safeguarding, junction…
-
-
Single-Phase Nonreversing Magnetic Motor Starter, 2 HP Max (CSF301)
$1,120.69The 115VAC, 30A non-reversing magnetic motor starter, self-latching red emergency-stop palm button, green motor control on push button and red motor control off push button are housed in a NEMA 12 enclosure. Enclosure size is 8″ x 6″ x 6″. It can be used for machines with 115VAC power and is rated up to 2…
-
Single-Phase Starter With Self-Latching Emergency-Stop Button, 1/2 HP Max (CSF082)
$510.25The 115VAC, 20A non-reversing magnetic motor starter, self-latching red emergency-stop palm button, green motor control on push button and red motor control off push button are housed in a NEMA 4 polycarbonate enclosure. Enclosure size is 5″ x 5″ x 4″. It can be used for machines with 115VAC power and is rated up to…
-
-
Slim Line Non-Locking Safety Switches
$286.10 – $379.71Tamper-resistant safety switches can be used to interlock hinged, sliding, or lift-off guards. Closure of the guard or latch causes the actuator to enter the switch and release the dual anti-tamper locking cams. The actuator allows the main center cam to rotate and make the switch contacts. When opening the guard or latch, the actuator…
-
Solenoid Locking Safety Interlock Switches
$1,154.98 – $1,408.12Kit includes switch, actuator, and conduit adapter. Locking switches are designed to prevent accidental or deliberate access while the machine is in motion. The mechanical locking feature is ideal for machines that have to finish a sequence, a program, or coast to a stop before the interlocked guard can be opened. The switches allow the…
-
Spring-Loaded/Self-Ejecting Drill Press Chuck Keys
$46.14 – $234.68Use the chart below to select your drill press chuck key. These drill press chuck keys are spring-loaded and self-eject so they are not inadvertently left in the drill’s chuck. Drill Press Chuck Keys – Pilot Size Selection Chart
-
Standard Palm Button Assemblies
$1,446.36 – $1,862.99Two-Hand Control, Standard Palm Button Assemblies To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with ring guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be…
-
Standard-Voltage Articulated Palm Button (CTC746)
$1,298.68The heavy-duty, standard-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
-
Steel Bases for Die Safety Blocks
$282.15 – $336.21This steel safety block base can be added to U-shaped, octagonal-shaped, and X-shaped safety blocks. The base adds stability to help prevent the die block from tipping over. Available in 1/2″-thick steel. To learn more about die blocks, we invite you to read our blog post “Demystifying Die Safety Blocks.” Aluminum safety block bases are…
-
Straight Rigid In-Line Actuator (CMC546A)
$68.56Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Super-Grabber Vacuum Lifter (KMK055)
$64.60The four-finger grip and larger cup provide extra lifting capacity. Its larger diameter makes this lifter ideal for greater loads. Breaks oil adhesions easily. It also has specially designed release tabs. Lifts about 12 pounds. 4 3/4″ diameter cup.
-
-
Tagouts
$6.72 – $8.57Tagout signs meet OSHA 29 CFR 1910.147 for lockout/tagout. The reverse side of each tagout is the same. Tagouts are 2 7/8″ x 5 1/2″ x .055″ thick polyethylene material. Available styles include: Do Not Start Do Not Operate Do Not Open Do Not Close Do Not Energize
-
-
Tower Light Assembly Control Box (LLD1631)
$367.85The tower light assembly control box provides a convenient means of mounting and wiring the tower light. The LLD1631 standard box comes with enough terminals to accommodate five (5) lights or four (4) lights with an alarm in the tower light assembly. This control box is approximately 8 inches x 6 inches x 6 inches.
-
Tweezers
$54.06Lightweight or Heavyweight Tweezers for Various Machinery Applications Part No. CYF-600 Lightweight tweezers. Total Length: 6 1/2″ Weight: 1 1/10 oz. Part No. CYF-601 Heavier tweezers. Total Length: 9″ Weight: 1 3/5 oz.
-
Universal Palm Button Ring Guard (CTK006)
$68.56This palm button ring guard is the way to protect new and existing run palm buttons from accidental operation. The ring guard is made from high-impact PVC plastic and can be used with most palm button brands. Four 1 1/4″ screws are furnished with each ring guard.
-
-
Yellow Return Palm Button (CTC740)
$531.34Emergency Stop, Yellow Return Palm Button (CTC740) This heavy-duty, single plunger yellow return palm button provides 1 NO and 1 NC contact arrangement. This 2 1/4″ button has a mushroom-shaped plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. This button is used to return the…
-
Yellow Top-Stop Palm Button (CTC727)
$531.34This heavy-duty, single plunger yellow top-stop palm button provides 1 NO and 1 NC contact arrangement. This 2 1/4″ button has a mushroom-shaped plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. The force required to operate this button is 4.3 lb.
