Category: Lathes
Showing 1–24 of 36 results
-
-
Protector Series Shields (RSS)
All Interlocked PROTECTOR Series Shields must be integrated into a proper motor starter that operates with a 120V coil, and requires actuation of the motor start pushbutton in order to re-start the machine after actuation of the interlock switch, or in the event of a power source failure. -
Automatic Sanding Belt Holder
$3,886.84 – $4,543.83The automatic sanding belt holder enables lathe operators to sand, polish and deburr without using their hands for work execution, keeping hands away at a safe operating distance. The holder is available in 25mm and 50mm sizes and can hold belts of different sizes and abrasion grits. The sanding belt holder meets ISO 23125 6.2.1.P…
-
Sanding Belts for Automatic Sanding Belt Holder
$24.30Sanding belts for the automatic sanding belt holder enables lathe operators to sand, polish and deburr without using their hands for work execution, keeping hands away at a safe operating distance.
-
Modular Emergency Stop Control System – Patch Cords
$126.18 – $182.74The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Terminating Cable (FDK316)
$72.51The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Wired Push Button Station
$511.96 – $603.34The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Small, Steel, Lathe Chuck Shields
$716.45 – $926.75These sturdily constructed small steel lathe chuck shields are fabricated of 18-gauge steel with reinforced sides and can be used on smaller lathes that have up to 18 1/2″ diameter chucks. Each shield is furnished with a 1″ x 13″ mounting rod which can be cut to length if required. This mounting rod is fastened…
-
Large Steel Lathe Chuck Shields
$2,140.67 – $4,614.89The large steel lathe chuck shields are made of fabricated 18-gauge steel with reinforced sides. They can be used on lathes that have chucks up to 47-inches in diameter. They are double hinged for access to the chuck, workpiece, and tool. The front hinged portion can be swung up for workpiece changes, and the entire…
-
Crosslide-Travel Lathe Shields With Reinforced Steel and High-Impact Polycarbonate Window
$854.23 – $1,211.01These crosslide-travel lathe shields mount on and travel with the crosslide for protection when machining long workpieces. The 18-guage reinforced steel housing provides protection from flying chips and coolant. The high-impact polycarbonate window permits visibility into the point of operation. The front portion of the lathe shield hinges up for access. These shields are ideal…
-
Sliding Lathe Shields
$4,031.86 – $5,254.48Heavy-duty sliding lathe shields are furnished in four different sizes. They are constructed of high quality, reinforced 12-gauge steel with a polycarbonate window. These shields are available for operator protection on large standard lathes, CNC machines, and OD grinders. The shields are designed to fit lathes with chucks up to 48 inches in diameter. Four…
-
Safety Chip Shields with Direct-Mount Flexible Arm
$174.03 – $413.34The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…
-
Safety Chip Shields with Magnetic-Mount Flexible Arm
$214.65 – $455.40The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…
-
Warning Label for High Voltage (KST194)
$18.49The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
-
Danger Signs For Cutting and Turning Machinery (KSC046-KSC046S-KSC046F)
$33.36Danger Signs For Cutting and Turning Machinery are designed for Visual Danger Awareness Signs are available in English, Spanish and French.
-
Cable and Push-Button E-Stop Assembly (CML510)
$1,393.74CML510 Assembly Includes:
• Cable and Push-Button E-Stop Switch
• Indicator Light and Bulb
• 7 Yards of Red PVC-Covered Steel Cable
• Tension Kit -
Emergency Stop Safety Relay – Single Channel (RFT148)
$684.55An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,135.60An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Enclosed Transformers
$540.97 – $665.69Direct Frame-Mounting Station, Enclosed Transformers These transformers comply with OSHA regulations and ANSI standards and are available for use when the motor start/stop station is remotely located from the starter enclosure, and voltage to these buttons must be 115 V or less. These transformers mount directly to the frame of the machine. If the existing…
-
Energy Source ID Tags
$4.50 – $12.33Energy Source Attachment ID Tags for Hazard Awareness These tags can be used to identify the different hazardous energy sources associated with machinery throughout a plant or factory. They can be permanently or temporarily attached at the energy source. These tags can be used in conjunction with a company’s energy control program. All tags are…
-
Free-Standing Safety Shield Assembly
$2,234.94 – $2,989.10These free-standing shield assemblies can be used to protect the area between machines, the backside of machines, along aisles, etc. These free-standing adjustable shield assemblies are available in a wide range of sizes. They are constructed of 3/16-inch-thick polycarbonate material surrounded by aluminum framing. The shield can easily be adjusted up or down on the…
-
Danger Signs for General Machinery Danger
$33.36General Danger Signs for All Machinery are designed to alert of machine danger. Signs available in English, Spanish and French.
-
Hazardous Voltage Warning Labels
$18.49The Hazardous Voltage Warning Labels, Visual Safety Technique are designed to be eye-catching and alert to the hazardous voltage in the work space.
-
Mounting Plate For Magnetic-Base Shields
$58.01These are designed to be used in the junction between the shield and the machinery being utilized.
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
