Category: Milling Machines
Showing 1–24 of 43 results
-
KYL019 Replacement Shield Equivalents
$799.16 – $2,587.71THE PROTECTOR™ SERIES SHIELDS The Milling Machine Chip Shields will be supported and supplied through January 1, 2024, or until inventory is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered in curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements…
-
KYL059 Replacement Shield Equivalents
$873.82 – $2,987.59THE PROTECTOR™ SERIES SHIELDS The Milling Machine Chip Shields will be supported and supplied through January 1, 2024, or until inventory is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered in curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements…
-
-
Modular Emergency Stop Control System – Patch Cords
$126.18 – $182.74The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Terminating Cable (FDK316)
$72.51The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Wired Push Button Station
$511.96 – $603.34The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
-
Universal Ball-and-Socket Chip Shields
$455.40 – $694.71Versatile, Various Sizes, Universal Ball-and-Socket Chip Shields A variety of these quality-constructed, universal ball-and-socket chip shields are available. These versatile shields are ideal for mills, drills, grinders, band saws, or similar equipment including woodworking machines. The shield places a barrier between operators or other employees in the area and the flying chips (swarf), sparks, and…
-
Safety Chip Shields with Direct-Mount Flexible Arm
$174.03 – $413.34The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…
-
Safety Chip Shields with Magnetic-Mount Flexible Arm
$214.65 – $455.40The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…
-
Adjustable-Slide Safety Shields
$174.03 – $195.79These high-quality adjustable slide shields can be used on drills, mills, saws, or special machine applications. The transparent portion of these shields is constructed of durable, clear 3/16″-thick poly-carbonate. The shield places a barrier between an operator and the flying chips (swarf), sparks, and coolant generated at the point of operation. These shields can be…
-
Warning Label for High Voltage (KST194)
$18.49The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
-
Emergency Stop Safety Relay – Single Channel (RFT148)
$684.55An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,135.60An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Enclosed Transformers
$540.97 – $665.69Direct Frame-Mounting Station, Enclosed Transformers These transformers comply with OSHA regulations and ANSI standards and are available for use when the motor start/stop station is remotely located from the starter enclosure, and voltage to these buttons must be 115 V or less. These transformers mount directly to the frame of the machine. If the existing…
-
Energy Source ID Tags
$4.50 – $12.33Energy Source Attachment ID Tags for Hazard Awareness These tags can be used to identify the different hazardous energy sources associated with machinery throughout a plant or factory. They can be permanently or temporarily attached at the energy source. These tags can be used in conjunction with a company’s energy control program. All tags are…
-
Free-Standing Safety Shield Assembly
$2,234.94 – $2,989.10These free-standing shield assemblies can be used to protect the area between machines, the backside of machines, along aisles, etc. These free-standing adjustable shield assemblies are available in a wide range of sizes. They are constructed of 3/16-inch-thick polycarbonate material surrounded by aluminum framing. The shield can easily be adjusted up or down on the…
-
Hazardous Voltage Warning Labels
$18.49The Hazardous Voltage Warning Labels, Visual Safety Technique are designed to be eye-catching and alert to the hazardous voltage in the work space.
-
Magnetic Safety Switches
$848.43 – $1,502.52Magnetic safety switches are used on perimeter guarding doors and slide or swing-open shields for drills, mills and other machines. These reed-type magnetic safety switches utilize magnetic actuation. They offer non-contact reliability along with tolerance for misalignment. These magnetic safety switches are totally submersible, which makes them ideal for environments where hygiene is important. Each…
-
Milling Machine Belt Cover (KYL021J)
$263.96This unique patented milling machine belt cover is made of durable cast aluminum. The hinged covers are sold in pairs for the right and left sides and are permanently attached to the machine. Spindle speed changes are done quickly and efficiently by simply pulling down the belt cover. OSHA requires under 29 CFR 1910.219 that…
-
Milling Machine Draw Bar Cover (DBC001)
$168.25This Draw Bar Cover (part #DBC001) protects vertical mill workers from rotating shafts below 7 feet off the ground. It guards the turning draw bar with a non-rotating, smooth, welded-steel enclosure, secured firmly to the mill with a powerful ring magnet and safety anchor chain. Simple to install, the draw bar cover prevents clothing, hair…
-
-
Mounting Plate For Magnetic-Base Shields
$58.01These are designed to be used in the junction between the shield and the machinery being utilized.
-
On/Off Magnetic-Base Shields
$712.11 – $912.25These versatile On-Off magnet-base shields can be used on lathes, drills, mills, grinders, or any equipment that has a flat, ferrous mounting surface. The heavy-duty magnetic base is 2 3/4-inch square with a V-groove and measures 3-inches high. The 200-lb holding force keeps the shield in place when the magnet is on. If an adequate…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
