Showing 73–96 of 108 results
The Maximum Load Safety Block Safety Label (KST330) is designed to be a visual warning of a maximum load to alert persons in the work place.
This combination grabber and lifter combines the flexibility of a grabber with the holding strength of a lifter. Just lift the tipped edge to release the vacuum. Lifts about 15 pounds. 3 1/4″ diameter cup
Sturdy construction and a fast-action metal release valve offer safe, quick handling of smooth surface materials. Full-hand grip for extra strength gives operator extra freedom of movement. Lifts about 10 pounds. 3 1/4″ diameter cup
These are designed to be used in the junction between the shield and the machinery being utilized.
This 37″ nonadjustable heavy-duty floor stand includes a top plate and a 4″ x 4″ column. The base has four holes for permanent attachment to the floor; bolts are not furnished.
This safety tool is used to raise awareness of the dangers of metal-forming machinery in the workplace.
The On/Off Magnetic Base Only With M12 Tap (FKT285) is designed to easily control the machine is a safe and non-hazardous manner for the worker.
Cutting/Turning and Forming/Fabricating Specific Operator Safety Signs are available in English, Spanish and French. Ex. “Never place your hands in this machine.”
This guard-opening sign is based on Table O-10 of OSHA 29 CFR 1910.217 for mechanical power presses, which shows the distances that guards shall be positioned from the point of operation based on opening size. This sign can be used by engineering, maintenance, etc., for reference when designing or fabricating guards. This 10″ x 12″…
This standard heavy-duty, single plunger run palm button provides one normally open and one normally closed contact arrangement. This 2 1/4″ button is mushroom-shaped. The palm button face plate has a solid neoprene gasket which provides an oil-tight seal upon installation. When applying two-hand control as a safeguard to any machine, fixture, device, etc., the…
Part No. CTK-004 Single-hub mounting box is used when wires terminate at this box. Part No. CTK-003 Double-hub mounting boxes are used when wires are required to go through the box and on to another mounting box. Part No. CTK-038 Deep single-hub mounting box is used when wires terminate at this box. Part No. CTK-039…
Stock positioner with screwdriver point with 90-degree bend to remove parts from die. Total Length: 14″ Weight: 2 1/2 oz.
Pliers and tongs are used to keep hands out of the point of operation while feeding or removing parts from the machine. Pliers and tongs, like all hand-feeding tools, are not considered to be guards or devices by themselves. But these hand tools offer additional protection. Most of the tools are constructed of soft alloy…
The point-of-operation gauge is designed to be used as a quick reference tool to check for what OSHA regulations and ANSI standards refer to as safe-opening. It is a valuable tool to use during the design, installation, and inspection of guards to make sure the openings do not exceed 1/4″ (6 mm) for OSHA/ANSI and…
This heavy-duty, single plunger red emergency-stop palm button provides 1 NO and 1 NC contact arrangement. This 2 1/4″ button has a mushroom-shaped plunger with a spring latch that keeps the button latched down when pushed to meet NFPA 79. A release is incorporated. It also has provisions for attaching a padlock to the latch….
Universal Ball-and-Socket Safety Shield Replacement Arms are designed to replace existing and worn Ball-and-Socket Arms in order to maximize safety levels and efficiency. Product Manual Download the Product Manual PDF
The Direct-Mount Flexible Spring-Steel Replacement Arms are designed to replace existing worn-down arms in order to maximize safety levels. Product Manual Download the Product Manual PDF
The Magnetic-Mount Flexible Spring-Steel Replacement are designed to replace the existing arms, when the arms become worn, in efforts to maximize safety levels and efficiency. Magnet have 100-lb pull. Product Manual Download the Product Manual PDF
The Flexible Spring-Steel Replacement Arms are designed to replace the existing arms for on/off magnet-base shields, when the arms become worn, in efforts to maximize safety levels and efficiency. Product Manual Download the Product Manual PDF
Rotating Gears and Pulley Danger Labels (KST181) are designed to raise awareness of the dangers with rotating gears and pulleys. Ex. “You are exposed to moving machine parts that can crush, dismember, and cause death.”
Open Monday – Friday
8:00am – 5:00pm CST
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
Copyright 2023. All Rights Reserved By Rockford Systems LLC
Rockford Combustion Solutions provides fuel-train management and combustion-safety solutions for safety-conscious organizations that work with fuel-fired equipment in thermal processes.
Rockford Combustion
5795 Logistics Parkway
Rockford, Illinois USA 61109