Category: Sanders
Showing all 20 results
-
Belt Sander Shields
$94.27 – $345.17These high-quality, adjustable belt sander shields place a barrier between an operator and flying debris generated at the point of operation. They fasten directly to the machine using 1″ x 2″ extruded aluminum with mounting hardware included. The transparent portion of the shield is constructed of high-impact-resistant, 3/16″-thick clear polycarbonate. Easy vertical adjustment of the…
-
Warning Label for High Voltage (KST194)
$18.49The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
-
Disc Sander Shields
$497.45 – $572.87<h5><span style=”color: #ac1222;”><strong>Product Manual</strong></span></h5>
<a href=”https://rockfordsystems.com/resources/product-manuals/”>Download the Product Manual PDF</a><a title=”Belt Sander Shields” href=”https://rockfordsystems.com/product/belt-sander-shields/”>Belt Sander Shields</a> are also available.
-
Emergency Stop Safety Relay – Single Channel (RFT148)
$684.55An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Electrical Plug Lockout Container (KYM088)
$94.27This lockout container can lock out plugs up to 3″ wide and 5 1/2″ long with a maximum cord diameter of 1 1/4″. The lockout consists of a round container and two cover plates made of a durable and chemically resistant thermoplastic. The cover plates, when used singularly or combined, are locked to produce a…
-
Electrical Plug-out (KYM983)
$163.88Two Step Close, Slide Assembly, Electrical Plug-out This lockout container accepts lockout plugs up to 2 3/4″ wide and 4 3/4″ long with a maximum cord diameter of 2 3/4″. It is constructed of high-impact, yellow UV-stabilized polymer. It has an easy to use two-step close and slide assembly. It allows the use of four…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,135.60An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Enclosed Transformers
$540.97 – $665.69Direct Frame-Mounting Station, Enclosed Transformers These transformers comply with OSHA regulations and ANSI standards and are available for use when the motor start/stop station is remotely located from the starter enclosure, and voltage to these buttons must be 115 V or less. These transformers mount directly to the frame of the machine. If the existing…
-
Energy Source ID Tags
$4.50 – $12.33Energy Source Attachment ID Tags for Hazard Awareness These tags can be used to identify the different hazardous energy sources associated with machinery throughout a plant or factory. They can be permanently or temporarily attached at the energy source. These tags can be used in conjunction with a company’s energy control program. All tags are…
-
Hazardous Voltage Warning Labels
$18.49The Hazardous Voltage Warning Labels, Visual Safety Technique are designed to be eye-catching and alert to the hazardous voltage in the work space.
-
Remote Station With Self-Latching Emergency Stop Button (HOS4000)
$464.09This emergency stop button measures 4 1/2 inches by 3 1/2 inches by 3 inches. It is housed in a NEMA 12 metal enclosure. The emergency stop is self-latching; to reset the red button, turn it to the right.
-
Replacement Lower Belt Sander Shield Only (6-Inch x 8-Inch) (KYL225)
$42.06This replacement shield is designed to replace worn-down shields to maximize safety levels in the workplace. Product Manual Download the Product Manual PDF
-
Replacement Safety Shields for Disc Sanders
$58.01 – $123.28The Disc Sander Replacement Shield is designed to replace existing shields that show signs of wear, to optimize safety. Product Manual Download the Product Manual PDF
-
Replacement Upper Belt Sander Shield Only (L-Shaped) (KYL227)
$123.28The Replacement Upper Belt Sander Shield Only (L-Shaped) (KYL227) is designed to replace existing shields that show signs of wear, to optimize safety. Product Manual Download the Product Manual PDF
-
Rigid-Arm Magnetic Base Chip Shields
$233.50 – $511.96The magnetic base chip shields can be used on lathes, small milling machines, drills, grinders, band saws, etc. These shields can be attached to any ferrous surface on the machine by an 80-lb. pull magnetic base. If a flat, smooth, ferrous surface is not available, a mounting plate (3 1/2″ x 4 5/8″) is also…
-
Warning Label for Rotating Gears and Pulley (KST181)
$18.49Rotating Gears and Pulley Danger Labels (KST181) are designed to raise awareness of the dangers with rotating gears and pulleys. Ex. “You are exposed to moving machine parts that can crush, dismember, and cause death.”
-
Sensing-Saf-Start®
$561.28 – $723.70Power Interruption Immune, Sensing-Saf-Start® Package The Sensing-Saf-Start® package is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the Saf-Start® package will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset…
-
-
Single-Phase Nonreversing Magnetic Motor Starter, 2 HP Max (CSF301)
$1,232.76The 115VAC, 30A non-reversing magnetic motor starter, self-latching red emergency-stop palm button, green motor control on push button and red motor control off push button are housed in a NEMA 12 enclosure. Enclosure size is 8″ x 6″ x 6″. It can be used for machines with 115VAC power and is rated up to 2…
-
Single-Phase Starter With Self-Latching Emergency-Stop Button, 1/2 HP Max (CSF082)
$561.28The 115VAC, 20A non-reversing magnetic motor starter, self-latching red emergency-stop palm button, green motor control on push button and red motor control off push button are housed in a NEMA 4 polycarbonate enclosure. Enclosure size is 5″ x 5″ x 4″. It can be used for machines with 115VAC power and is rated up to…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
