Category: Grinders
Showing 1–24 of 35 results
-
-
Protector Series Shields (RSS)
All Interlocked PROTECTOR Series Shields must be integrated into a proper motor starter that operates with a 120V coil, and requires actuation of the motor start pushbutton in order to re-start the machine after actuation of the interlock switch, or in the event of a power source failure. -
Safety Chip Shields with Direct-Mount Flexible Arm
$174.03 – $413.34The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…
-
Safety Chip Shields with Magnetic-Mount Flexible Arm
$214.65 – $455.40The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…
-
Bench Grinder Safety Gauge (KSC096)
$37.71The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. OSHA 29 CFR 1910.215…
-
Bench Grinder Safety Gauge with Tether (KSC096T), (Includes SS Tether)
$62.36The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. The bench grinder gauge…
-
Bench Grinder Safety Shields with Direct-Mount Flexible-Arm
$204.50 – $263.96Double- and Single-wheel bench grinder shields are available to attach to bench grinders. Double-wheel bench grinder shields provide protection for both wheels of the grinder with one continuous shield. The durable shield is made of clear, 3/16-inch-thick polycarbonate and measures 18-inch x 6-inch. A special shield bracket adds stability to the top of the shield….
-
Bench Grinder Safety Shields with Magnetic-Mount Flexible-Arm
$245.10 – $303.11Double- and Single-wheel shields are designed to attach to bench grinders. The double-wheel grinder shield provides protection for both wheels of the grinder with one continuous shield. The durable shield is made of clear, 3/16-inch-thick polycarbonate and measures 18-inch x 6-inch. A special shield bracket adds stability to the top of the shield. The single-wheel…
-
Warning Label for High Voltage (KST194)
$18.49The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
-
Danger Signs For Cutting and Turning Machinery (KSC046-KSC046S-KSC046F)
$33.36Danger Signs For Cutting and Turning Machinery are designed for Visual Danger Awareness Signs are available in English, Spanish and French.
-
Emergency Stop Safety Relay – Single Channel (RFT148)
$684.55An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Electrical Plug Lockout Container (KYM088)
$94.27This lockout container can lock out plugs up to 3″ wide and 5 1/2″ long with a maximum cord diameter of 1 1/4″. The lockout consists of a round container and two cover plates made of a durable and chemically resistant thermoplastic. The cover plates, when used singularly or combined, are locked to produce a…
-
Electrical Plug-out (KYM983)
$163.88Two Step Close, Slide Assembly, Electrical Plug-out This lockout container accepts lockout plugs up to 2 3/4″ wide and 4 3/4″ long with a maximum cord diameter of 2 3/4″. It is constructed of high-impact, yellow UV-stabilized polymer. It has an easy to use two-step close and slide assembly. It allows the use of four…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,135.60An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Enclosed Transformers
$540.97 – $665.69Direct Frame-Mounting Station, Enclosed Transformers These transformers comply with OSHA regulations and ANSI standards and are available for use when the motor start/stop station is remotely located from the starter enclosure, and voltage to these buttons must be 115 V or less. These transformers mount directly to the frame of the machine. If the existing…
-
Energy Source ID Tags
$4.50 – $12.33Energy Source Attachment ID Tags for Hazard Awareness These tags can be used to identify the different hazardous energy sources associated with machinery throughout a plant or factory. They can be permanently or temporarily attached at the energy source. These tags can be used in conjunction with a company’s energy control program. All tags are…
-
Flat Mounting Bracket for 18-inch x 6-inch Shield
$58.01This mounting bracket is designed to stabilize the 18-inch x 6-inch bench grinder shield.
-
Danger Signs for General Machinery Danger
$33.36General Danger Signs for All Machinery are designed to alert of machine danger. Signs available in English, Spanish and French.
-
Hazardous Voltage Warning Labels
$18.49The Hazardous Voltage Warning Labels, Visual Safety Technique are designed to be eye-catching and alert to the hazardous voltage in the work space.
-
Mounting Plate For Magnetic-Base Shields
$58.01These are designed to be used in the junction between the shield and the machinery being utilized.
-
On/Off Magnetic-Base Shields
$712.11 – $912.25These versatile On-Off magnet-base shields can be used on lathes, drills, mills, grinders, or any equipment that has a flat, ferrous mounting surface. The heavy-duty magnetic base is 2 3/4-inch square with a V-groove and measures 3-inches high. The 200-lb holding force keeps the shield in place when the magnet is on. If an adequate…
-
Remote Station With Self-Latching Emergency Stop Button (HOS4000)
$464.09This emergency stop button measures 4 1/2 inches by 3 1/2 inches by 3 inches. It is housed in a NEMA 12 metal enclosure. The emergency stop is self-latching; to reset the red button, turn it to the right.
-
-
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
