Category: Press Brakes
Showing 1–24 of 98 results
-
Foot Switch Orange (CTD088)
$828.12Keeps operators hands free from machinery by using cast-iron foot switches, designed for use on machinery with proper “Point of Operation” and “Pinch Point” guarding devices in place. This foot switch is protected from unintentional operation. A die-cast cover protects the top and both sides, and the front is protected by a hinged flap. The…
-
-
-
-
-
-
-
PROTECTOR™ Series Light Curtain Mirrors
$456.85 – $1,186.35NEW Protector™ Series Mirrors are used to guard the perimeter of a work cell, whereby corner mirrors can be set up to reflect the sensing field from the emitter, around the perimeter’s corners, to the receiver. Using corner mirrors is an economical way to make use of the range of a PROTECTOR Series Light Curtains…
-
-
-
-
Modular Emergency Stop Control System – Patch Cords
$126.18 – $182.74The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Terminating Cable (FDK316)
$72.51The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Wired Push Button Station
$511.96 – $603.34The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Adjustable Floor Stand for Control Bar or Palm Button Assembly (KCL017)
$1,139.94The adjustable column (28″ to 47″) on this floor stand can easily be moved up and down for operator comfort. A hand tool is required to make adjustments. The base has four holes for permanent attachment to the floor; bolts are not furnished. Custom heights are available. Please consult the factory.
-
-
-
Articulated Palm Button Assemblies
$2,356.75 – $3,096.41To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be used as a point-of-operation safeguard. These palm…
-
Warning Label for High Voltage (KST194)
$18.49The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
-
Danger Signs for Closing Ram and Die Labels (KST134-KST135-KST136-KST137-KST143-KST145-KST146)
$18.49Danger Signs for Closing Ram and Die signs are designed for Visual Danger Awareness. Signs are available in English, Spanish and French. “You are exposed to moving machine parts that can crush, dismember or cause death.”
-
Stop-Time Measurement (STM) Device Complete (DCL100)
$14,582.88Complete STM including meter, transducer, cable extension set, actuator, flag, legs, and plunger extension. This is a non-stock item and may incur an extended delivery time.
-
Remote Tachometer Assembly (DCL101)
$2,894.82Optional remote tachometer assembly (for reciprocating machines that stop beyond bottom or top, and for machines with relatively slow rotating or linear motion). For STM (Stop-Time Measurement) Device
-
N.O. Manual Start Switch (DCL102)
$388.69The N.O. Manual Start Switch is designed to be compatible with a large variety of practical machinery application needs.
-
Die Safety Block Holders
$182.74 – $429.29These die safety block holders are designed to accept U-shaped, octagonal, X-shaped, and adjustable safety blocks. They are constructed of heavy-gauge steel and painted safety orange. The holders attach easily to the machine with two 1/4-inch fasteners. A strap is furnished with each holder to keep the block in place. Safety wedges can also be…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
