Category: Safeguarding Accessories
Showing 1–24 of 82 results
-
-
Ejection Curtain Guarding Kits for Presses
$3,469.14 – $4,066.67Ejection Curtain Guarding Kits for Presses are designed for organizations that require a superior hydraulic press safety solution to help protect their employees and prevent injuries caused by flying, rolling or sliding debris. Most commonly used on H-presses or compacting presses that are hydraulic powered, the ejection curtains are coiled-wire fabric machine guards, widely used…
-
-
PROTECTOR™ Series Light Curtain Mirrors
$456.85 – $1,186.35NEW Protector™ Series Mirrors are used to guard the perimeter of a work cell, whereby corner mirrors can be set up to reflect the sensing field from the emitter, around the perimeter’s corners, to the receiver. Using corner mirrors is an economical way to make use of the range of a PROTECTOR Series Light Curtains…
-
Adjustable Floor Stand for Control Bar or Palm Button Assembly (KCL017)
$1,139.94The adjustable column (28″ to 47″) on this floor stand can easily be moved up and down for operator comfort. A hand tool is required to make adjustments. The base has four holes for permanent attachment to the floor; bolts are not furnished. Custom heights are available. Please consult the factory.
-
Heavy-Duty Aluminum Drill Press Shields
$523.57 – $767.22These cast-aluminum drill press shields are furnished with a standard 1 3/4-inch bore. The user can bore this shield to a size of up to 3 1/2-inches for attaching to the quill of a drilling machine. This drill press shield is available in 2-tier or 3-tier models which provides 3- to 6-inches travel of the…
-
Articulated Palm Button Assemblies
$2,356.75 – $3,096.41To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be used as a point-of-operation safeguard. These palm…
-
Bench Grinder Safety Gauge (KSC096)
$37.71The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. OSHA 29 CFR 1910.215…
-
Bench Grinder Safety Gauge with Tether (KSC096T), (Includes SS Tether)
$62.36The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. The bench grinder gauge…
-
Chrome, Light-Push Button (CTC737)
$572.87This heavy-duty, light-push, single plunger run/inch palm button provides 1 NO and 1 NC contact arrangement. This 2 1/2″ button is constructed of zinc cast and has a flat plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. This palm button can be used instead of…
-
Warning Label for High Voltage (KST194)
$18.49The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
-
Danger Signs For Cutting and Turning Machinery (KSC046-KSC046S-KSC046F)
$33.36Danger Signs For Cutting and Turning Machinery are designed for Visual Danger Awareness Signs are available in English, Spanish and French.
-
Danger Signs for Robots (KSC071-KSC071S)
$33.36Danger Sign for Robots, Visual Safety Tool (KSC071-KSC071S) These visual safety tools raise awareness in the workplace about the danger of robots in nearby proximity. These signs are available in English and Spanish. Ex. “You are exposed to moving robot parts that can crush, dismember, and cause death.”
-
Danger Signs for Closing Ram and Die Labels (KST134-KST135-KST136-KST137-KST143-KST145-KST146)
$18.49Danger Signs for Closing Ram and Die signs are designed for Visual Danger Awareness. Signs are available in English, Spanish and French. “You are exposed to moving machine parts that can crush, dismember or cause death.”
-
N.O. Manual Start Switch (DCL102)
$388.69The N.O. Manual Start Switch is designed to be compatible with a large variety of practical machinery application needs.
-
Warning Labels for Die Safety Blocks (KST323-KST323S)
$19.22The Die Safety Block Warning Labels (KST323-KST323S) These visual safety tools are designed as visual safety tools to raise awareness of the dangers of die safety blocks nearby. These signs are available in English and Spanish.
-
Dual-Solenoid Air Valves for Mechanical Power Presses and Press Brakes
$2,240.72 – $8,491.57These monitored dual solenoid air valves are ideal to use on mechanical power presses and other potentially hazardous machinery that utilize a pneumatically controlled clutch and brake mechanism. Each valve has two valve elements independently controlled by two solenoid pilots. The two valve elements share common inlet, outlet, and exhaust ports. When the pilot valves…
-
-
Emergency Stop Safety Relay – Single Channel (RFT148)
$684.55An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,135.60An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Energy Source ID Tags
$4.50 – $12.33Energy Source Attachment ID Tags for Hazard Awareness These tags can be used to identify the different hazardous energy sources associated with machinery throughout a plant or factory. They can be permanently or temporarily attached at the energy source. These tags can be used in conjunction with a company’s energy control program. All tags are…
-
Ergonomic Safeball Ball and Socket Mount (FKT301)
$304.57THIS PRODUCT HAS A 10-DAY LEAD TIME The FKT301 is designed to be used with the ergonomic Safeball palm button (CTC773). It is a flexible ball joint mount that offers tilt and rotation for increased ergonomic support.
-
EX-AL™ Hinges and Ball Lock Pin
$29.37 – $411.88Hinges are used to swing guard panels and segments to the right or left. They are attached to the aluminum extrusion anywhere along the T-slot with button-head or socket-head cap screws and T-nuts (furnished). Standard aluminum hinges and lift-off hinges are available. This specially designed hinge assembly is used on the light curtain swing-away mounting…
-
EX-AL™ Joining-and-Locking-Plates
$9.43 – $62.36A variety of brackets, plates, clamps, bolts, bearings, rollers, etc., are available for attaching guards to machines and for guard assemblies. Joining plates are used to connect extruded panels without additional machining. Joining strips and plates are used to connect extrusions to one another or to machines. The standard sizes of most of these mounting…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
