Control Bars (MCB)
Showing 1–24 of 110 results
Ejection Curtain Guarding Kits for Presses are designed for organizations that require a superior hydraulic press safety solution to help protect their employees and prevent injuries caused by flying, rolling or sliding debris. Most commonly used on H-presses or compacting presses that are hydraulic powered, the ejection curtains are coiled-wire fabric machine guards, widely used…
NEW Protectorâ„¢ Series Mirrors are used to guard the perimeter of a work cell, whereby corner mirrors can be set up to reflect the sensing field from the emitter, around the perimeter’s corners, to the receiver. Using corner mirrors is an economical way to make use of the range of a PROTECTOR Series Light Curtains…
Features Meets industry OSHA, ANSI, UL, IEC, and EN safety standards 3 models to choose from—standard, advanced, and professional Selectable resolutions—30 mm (1.18″), 40 mm (1.58″), 50 mm (1.96″), 70 mm (2.75″), and 150 mm (5.9″) 190° scanning angle Protective field scanning range radius up to 23′ (7 m) Warning field scanning range radius up…
These lockout devices accommodate a large variety of electrical plugs. The large device (Part No. KYM-987) also locks out necked-down pneumatic male fittings commonly attached to compressed air hoses. These devices accommodate up to four padlocks with 9/32″ maximum shackle diameter. Part No. KYM-984 is for plugs up to 1 1/2″ wide, 1 1/2″ high,…
The adjustable column (28″ to 47″) on this floor stand can easily be moved up and down for operator comfort. A hand tool is required to make adjustments. The base has four holes for permanent attachment to the floor; bolts are not furnished. Custom heights are available. Please consult the factory.
These cast-aluminum drill press shields are furnished with a standard 1 3/4-inch bore. The user can bore this shield to a size of up to 3 1/2-inches for attaching to the quill of a drilling machine. This drill press shield is available in 2-tier or 3-tier models which provides 3- to 6-inches travel of the…
To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be used as a point-of-operation safeguard. These palm…
The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. OSHA 29 CFR 1910.215…
The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. The bench grinder gauge…
This heavy-duty, light-push, single plunger run/inch palm button provides 1 NO and 1 NC contact arrangement. This 2 1/2″ button is constructed of zinc cast and has a flat plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. This palm button can be used instead of…
The Danger High Voltage Label, Visual Safety Tool (KST194) is a visual warning to alert of high voltage danger in the workplace.
Danger Signs For Cutting and Turning Machinery are designed for Visual Danger Awareness Signs are available in English, Spanish and French.
Danger Sign for Robots, Visual Safety Tool (KSC071-KSC071S) These visual safety tools raise awareness in the workplace about the danger of robots in nearby proximity. These signs are available in English and Spanish. Ex. “You are exposed to moving robot parts that can crush, dismember, and cause death.”
Danger Signs for Closing Ram and Die signs are designed for Visual Danger Awareness. Signs are available in English, Spanish and French. “You are exposed to moving machine parts that can crush, dismember or cause death.”
The N.O. Manual Start Switch is designed to be compatible with a large variety of practical machinery application needs.
NOTE: EXTENDED LEAD TIMES APPLY (2 WEEKS) For organizations that use riveters and welders, the new and improved Detect-A-Finger Gen II drop-probe device helps to protect the operator’s fingers from pinch-point hazards and meets the compliance requirements for a Category 2 safeguarding device. The Gen II upgrades include a longer stroke up to 1.85″, unified…
The Die Safety Block Warning Labels (KST323-KST323S) These visual safety tools are designed as visual safety tools to raise awareness of the dangers of die safety blocks nearby. These signs are available in English and Spanish.
Open Monday – Friday
8:00am – 5:00pm CST
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
Copyright 2023. All Rights Reserved By Rockford Systems LLC
Rockford Combustion Solutions provides fuel-train management and combustion-safety solutions for safety-conscious organizations that work with fuel-fired equipment in thermal processes.
Rockford Combustion
5795 Logistics Parkway
Rockford, Illinois USA 61109