Category: Safeguarding Devices
Showing 73–96 of 104 results
-
Guard Opening Requirements Sign OSHA (KSC012)
$35.70This guard-opening sign is based on Table O-10 of OSHA 29 CFR 1910.217 for mechanical power presses, which shows the distances that guards shall be positioned from the point of operation based on opening size. This sign can be used by engineering, maintenance, etc., for reference when designing or fabricating guards. This 10″ x 12″…
-
Palm Button Assemblies – Black Palm Button (CTC726)
$644.01This standard heavy-duty, single plunger run palm button provides one normally open and one normally closed contact arrangement. This 2 1/4″ button is mushroom-shaped. The palm button face plate has a solid neoprene gasket which provides an oil-tight seal upon installation. When applying two-hand control as a safeguard to any machine, fixture, device, etc., the…
-
Palm Button Mounting Boxes
$72.94 – $142.77Part No. CTK-004 Single-hub mounting box is used when wires terminate at this box. Part No. CTK-003 Double-hub mounting boxes are used when wires are required to go through the box and on to another mounting box. Part No. CTK-038 Deep single-hub mounting box is used when wires terminate at this box. Part No. CTK-039…
-
Point-Of-Operation Gauge (KSC100)
$40.35The point-of-operation gauge is designed to be used as a quick reference tool to check for what OSHA regulations and ANSI standards refer to as safe-opening. It is a valuable tool to use during the design, installation, and inspection of guards to make sure the openings do not exceed 1/4″ (6 mm) for OSHA/ANSI and…
-
Portable Welding Screen and Grinding Station Screen (PTS01200)
$2,866.23This portable welding screen offers protection for personnel who are in the area of welding and grinding work zones. The .4 mm-thick, semi-transparent PVC screen protects personnel from metal chips and sparks produced during the welding and/or grinding process. The red PVC screen pulls out easily from the mobile stand and attaches to a center…
-
Danger Signs for Press Brakes (KSC060-KSC060S)
$35.70Press Brake Danger, Visual Safety Signs (KSC060-KSC060S) are designed for visual danger awareness. Sign are available in English and Spanish.
-
Pressure-Sensitive Safety Mats
$1,052.14 – $4,475.47Safety mats are available in numerous sizes, and are available with or without edging. This is a non-stock item and may incur an extended delivery time. Pressure-sensitive safety mats are intended to be used as auxiliary or additional safeguarding equipment to protect operators and other employees in the machine area. They must not be used…
-
Right Angle Rigid In-Line Actuator (CMC547A)
$80.70In-line safety actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Riveter and Welder Safety – Adjustable Stroke Detect-a-Finger® Drop-Probe Device
$3,792.68For Safeguarding Riveters, Spot Welders, Eyeletters, Stakers, Staplers, Crimpers, Fastening and Assembly Machines Riveter and Welder Safety The Detect-A-Finger is a cost-effective solution to help protect the operator’s fingers from pinch-point hazards. The DAF100 Adjustable Stroke Detect-A-Finger® drop-probe device for riveters and welders reduces accidents at the point of operation where the operator’s fingers can…
-
Warning Label for Rotating Gears and Pulley (KST181)
$19.78Rotating Gears and Pulley Danger Labels (KST181) are designed to raise awareness of the dangers with rotating gears and pulleys. Ex. “You are exposed to moving machine parts that can crush, dismember, and cause death.”
-
Safety Bumper
$670.40 – $1,466.47This safety bumper system is designed to protect someone or something from hazardous machine conditions. A safety bumper and a safety interface control provides a Category 3 safety system. The bumper is an industrial grade, pressure-sensitive safety device with a built-in sensor, and is supplied with 4-lead wiring. When a person or object comes in…
-
Safety Bumper Control Interface (RKR164)
$2,990.38The safety bumper control interface (Part No. RKR164) consists of a safety controller, power supply, force-guided relays, terminals, and fuses all inside an enclosure for bumper switches. An on/off selector switch and a lighted reset push button are on the front of the enclosure. If the safety bumper is pressed and stops machine motion, then…
-
Safety Distance Guide Slide Chart (LLL050)
$27.16This slide chart calculates the safety distance for mounting two-hand trip, two-hand control, and presence-sensing devices on machinery.
-
-
Safety Mat Junction Boxes
$1,199.58 – $1,477.34Safety Mat Junction Boxes with Easy Tie-In for Grouping up to 10 safety mats. Part No. RKR-021 Mat junction box can provide wiring for up to 10 mats for easy tie-in to the mat control. (Cover has been removed for photo.) If multiple mats are grouped together to provide auxiliary or perimeter (work-envelope) safeguarding, junction…
-
Self-Ejecting Lathe Chuck Wrenches
$394.16 – $504.34Lathe chuck wrenches help prevent one of the most common accidents on lathes: when a chuck wrench (or key) is thrown from the chuck. This happens when someone forgets to remove the chuck wrench from the chuck before the machine is turned on. A self-ejecting, spring-loaded chuck wrench can be used on lathes or other…
-
-
Slim Line Non-Locking Safety Switches
$336.74 – $446.92Tamper-resistant safety switches can be used to interlock hinged, sliding, or lift-off guards. Closure of the guard or latch causes the actuator to enter the switch and release the dual anti-tamper locking cams. The actuator allows the main center cam to rotate and make the switch contacts. When opening the guard or latch, the actuator…
-
Solenoid Locking Safety Interlock Switches
$1,359.41 – $1,657.36Kit includes switch, actuator, and conduit adapter. Locking switches are designed to prevent accidental or deliberate access while the machine is in motion. The mechanical locking feature is ideal for machines that have to finish a sequence, a program, or coast to a stop before the interlocked guard can be opened. The switches allow the…
-
Spring-Loaded, Self-Ejecting, Safety Turnover Bars
$336.74 – $533.84Spring-loaded turnover bars are most frequently used with mechanical power presses. Turnover bars can also be used on four-slides or any other machine where the bar might be sent into the air if it is inadvertently left in the bar ring hole and the machine is turned on. Each spring-loaded turnover bar is self-ejecting so…
-
Spring-Loaded/Self-Ejecting Drill Press Chuck Keys
$54.30 – $276.22Use the chart below to select your drill press chuck key. These drill press chuck keys are spring-loaded and self-eject so they are not inadvertently left in the drill’s chuck. Drill Press Chuck Keys – Pilot Size Selection Chart
-
Standard Palm Button Assemblies
$1,702.37 – $2,192.74Two-Hand Control, Standard Palm Button Assemblies To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with ring guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be…
-
Standard-Voltage Articulated Palm Button (CTC746)
$1,528.55The heavy-duty, standard-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
-
Straight Rigid In-Line Actuator (CMC546A)
$80.70Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2024. All Rights Reserved By Rockford Systems LLC
