Category: Safeguarding Accessories
Showing 25–48 of 82 results
-
EX-AL™ Linear Bearings and Channel Guide
$49.30 – $130.53Linear bearings and channel guides are used in applications such as sliding panels or gates. These cost-effective alternatives to traditional bearings can be used in both low and high acceleration/deceleration applications. Linear bearings mate and glide on T-Slot aluminum extrusion profiles and the bearing pads are self-lubricating for smooth linear motion.
-
EX-AL™ Mounting Brackets
$25.38 – $97.16Mounting brackets are used for attaching extrusion-constructed guards to one another or to machines. The standard sizes of most of these mounting brackets are .188 thick 6063 aluminum alloy, clear anodized with .257 diameter holes on 1.0″ center lines.
-
EX-AL™ T-Handle Hex Wrenches
$39.15 – $40.61The T-handle hex wrench is an ideal way to tighten and loosen button-head cap screws and socket-head cap screws. The handle has a cushion grip and the long arm (approx. 7 1/8″ arm / 9″ total w/handle) provides access to hard to reach areas. The end of the hex wrench is ball-shaped which allows for…
-
EX-AL™ T-Nuts, Fasteners and End Caps
$0.55 – $15.22EX-AL™ Various T-Nuts, Fasteners and End Caps T-nuts allow joining plates, panels, hinges, and other accessories to be bolted into the T-slot of any of the extrusions. They are made of hardened steel and are coated with corrosion-resistant black oxide. Standard T-nuts slide into the T-slot from the end. The drop-in style allows the T-nut…
-
Flywheel Rotation Sign
$18.49Flywheel Rotation Sign for Visual Danger Attention The Flywheel Rotation Sign for Visual Danger Attention are danger signs for flywheel rotation. Includes arrow pointing to flywheel danger.
-
Foot Switch Signs (KSC055-KSC055S-KSC055F)
$33.36The Foot Switch Signs and Labels are designed for visual awareness and are available in English, Spanish and French.
-
Function-Testing Checklist for Light Curtains (LLL055)
$17.04Light curtains should be function-tested often using the function-testing checklist at every setup, operator change, and shift change, as well as every time after maintenance is performed. This light curtain function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine….
-
Function-Testing Checklist for Perimeter Barrier Guards (LLL059)
$17.04This checklist can be used to function-test perimeter barrier guards. This should be done at every setup, operator, and shift change, as well as every time after maintenance is performed. The checklist is laminated and has a grommet in the corner so it can be attached to the barrier guard. The function-testing procedures are on…
-
Function-Testing Checklist for Point-of-Operation Barrier Guarding (LLL058)
$17.04Barrier guards should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This point-of-operation barrier guard function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine. The checklist has the function-testing…
-
Function-Testing Checklist for Pullback Devices (LLL060)
$17.04Pullback devices should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This pullback device function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine.
-
Function-Testing Checklist for Restraint Devices (LLL065)
$17.04Restraint devices should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This restraint device function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine.
-
Function-Testing Checklist for Two-Hand Control and Two-Hand Trip
$17.04Before operating a machine with two-hand control or two-hand trip, function tests should be done to make sure that the safeguard is adjusted and working properly. These tests should be done at every setup, operator, and shift change, as well as every time after maintenance is performed. This two-hand control and two-hand trip function-testing checklist…
-
Danger Signs for General Machinery Danger
$33.36General Danger Signs for All Machinery are designed to alert of machine danger. Signs available in English, Spanish and French.
-
General Metal-Forming Machine Signs (KSC054-KSC054S)
$33.36The General Metal-Forming Machine Signs (KSC054-KSC054S) are designed for visual awareness and are produced in English and Spanish.
-
Guard-Opening Scale – ANSI / CSA (KSC098)
$58.01An ANSI and CSA guard opening scale is a valuable tool to use during the design, installation, and inspection of guards to make sure they comply with ANSI and CSA safety standards. This folding guard opening scale is based on “A Review of Machine-Guarding Recommendations” by Donald R. Vaillancourt and Stover H. Snook of the…
-
Guard-Opening Scale – OSHA (KSC097)
$58.01An OSHA guard opening scale is a valuable tool to use during the design, installation, and inspection of guards to make sure they comply with OSHA’s Table O-10. This folding guard opening scale is based on Table O-10 of OSHA 29 CFR 1910.217 for mechanical power presses. It shows the distances that guards shall be…
-
EX-AL™ Hairpin Clip Assembly for Perimeter Guarding (FKT753)
$7.26The Hairpin Clip Assembly for Perimeter Guarding (FKT753) is designed for holding the hairpin ends and are essential in appropriate hairpin assembly.
-
Hazardous Voltage Warning Labels
$18.49The Hazardous Voltage Warning Labels, Visual Safety Technique are designed to be eye-catching and alert to the hazardous voltage in the work space.
-
Light Curtain Floor Stand (KTR077)
$852.78This is a non-stock item and may incur an extended delivery time.
-
Light Curtain Mirrors For Light Curtains
$591.73 – $2,097.15Light curtain mirrors can be used with the light curtain to protect more than one side of the point of operation or work envelope. The mirrors for light curtains can help protect two, three, and even four sides of the point of operation or perimeter area. They are usually mounted on a 45-degree angle at…
-
-
Low-Voltage Articulated Palm Button (CTC751)
$1,505.42This heavy-duty, low-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
-
-
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
