Category: Disconnect Switches, Motor Starters, and Accessories
Showing 1–24 of 32 results
-
-
-
4 Maximum Padlocks, Accommodating Lock-a-Plugs
$104.42 – $114.58These lockout devices accommodate a large variety of electrical plugs. The large device (Part No. KYM-987) also locks out necked-down pneumatic male fittings commonly attached to compressed air hoses. These devices accommodate up to four padlocks with 9/32″ maximum shackle diameter. Part No. KYM-984 is for plugs up to 1 1/2″ wide, 1 1/2″ high,…
-
Modular Emergency Stop Control System – Patch Cords
$126.18 – $182.74The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Terminating Cable (FDK316)
$72.51The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Wired Push Button Station
$511.96 – $603.34The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
N.O. Manual Start Switch (DCL102)
$388.69The N.O. Manual Start Switch is designed to be compatible with a large variety of practical machinery application needs.
-
Cable and Push-Button E-Stop Assembly (CML510)
$1,393.74CML510 Assembly Includes:
• Cable and Push-Button E-Stop Switch
• Indicator Light and Bulb
• 7 Yards of Red PVC-Covered Steel Cable
• Tension Kit -
Emergency Stop Safety Relay – Single Channel (RFT148)
$684.55An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Electrical Plug Lockout Container (KYM088)
$94.27This lockout container can lock out plugs up to 3″ wide and 5 1/2″ long with a maximum cord diameter of 1 1/4″. The lockout consists of a round container and two cover plates made of a durable and chemically resistant thermoplastic. The cover plates, when used singularly or combined, are locked to produce a…
-
Electrical Plug-out (KYM983)
$163.88Two Step Close, Slide Assembly, Electrical Plug-out This lockout container accepts lockout plugs up to 2 3/4″ wide and 4 3/4″ long with a maximum cord diameter of 2 3/4″. It is constructed of high-impact, yellow UV-stabilized polymer. It has an easy to use two-step close and slide assembly. It allows the use of four…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,135.60An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Enclosed Transformers
$540.97 – $665.69Direct Frame-Mounting Station, Enclosed Transformers These transformers comply with OSHA regulations and ANSI standards and are available for use when the motor start/stop station is remotely located from the starter enclosure, and voltage to these buttons must be 115 V or less. These transformers mount directly to the frame of the machine. If the existing…
-
Flat Mounting Bracket for 18-inch x 6-inch Shield
$58.01This mounting bracket is designed to stabilize the 18-inch x 6-inch bench grinder shield.
-
Lockout Hasps
$30.80 – $37.71These lockout hasps are made from 12-gauge steel that is epoxy-coated for superior rust resistance and added dieletric strength. The yellow plastic coating on the lock area is for visibility. These devices accept up to six padlocks with 9/32″ maximum shackle diameter. Part No. KYM-988 is a 1″ diameter lockout hasp. Part No. KYM-989 is…
-
Magnetic Safety Switches
$848.43 – $1,502.52Magnetic safety switches are used on perimeter guarding doors and slide or swing-open shields for drills, mills and other machines. These reed-type magnetic safety switches utilize magnetic actuation. They offer non-contact reliability along with tolerance for misalignment. These magnetic safety switches are totally submersible, which makes them ideal for environments where hygiene is important. Each…
-
Metal Conduit Adapter—M20 to 1/2″ (SIQMM20)
$36.26Metal Conduit Adapter—M20 to 1/2″ (SIQMM20) – Rockford Systems, LLC produces metal conduit adapters in various sizes and are for help with machinery needs.
-
-
Non-locking Safety Switches—Flat-Pack Style
$277.01 – $350.982 NC & 1 NO Safety Contacts*
*With actuator engaged
-
Non-Locking Safety Switches—Metal Housing
$643.94 – $745.46These tamper-resistant safety switches can be used to interlock hinged, sliding, or lift-off guards. Closure of the guard or latch causes the actuator to enter the switch and release the dual anti-tamper locking cams. The actuator allows the main center cam to rotate and make the switch contacts. When opening the guard or latch, the…
-
On/Off Magnetic Base Only With M12 Tap (FKT285)
$671.48The On/Off Magnetic Base Only With M12 Tap (FKT285) is designed to easily control the machine is a safe and non-hazardous manner for the worker.
-
Plastic Conduit Adapter—M20 to 1/2″ (SIQSM20)
$30.82Spare Plastic Conduit Adapter—M20 to 1/2″ (SIQSM20)
-
Milling Machine Control
$4,178.34Themilling machine control is designed for vertical milling machines that have a table motor. Each milling machine control is housed in a NEMA 12 enclosure that includes a disconnect switch, reversing magnetic main drive motor starter, a control relay for the table motor, and a 100 VA transformer that is generically numbered and wired to…
-
Remote Station With Motor On Push Button and Emergency-Stop Palm Button (VOS2000)
$545.33For Use With Nonreversing Motor Starters
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
