Archives: Products
Showing 73–96 of 248 results
-
Double-Cup Verti-Lift
$586.71 – $594.63Double-Cup Verti-Lift with Powerful Suction Capabilities Powerful suction cups are used to lift and move loads from the floor without having to bend over. It has a handy trigger-valve release to disengage the vacuum lifter instantly and safely. These hand-operated vacuum lifters are used for repeated lifting and moving of non-porous materials on the ground…
-
Drop-Probe Rod for Detect-a-Finger® (FCT030)
$6.60The DAF100 Adjustable Stroke Detect-A-Finger® drop-probe device for riveters and welders reduces accidents at the point of operation where the operator’s fingers can enter. This device is an electric-air system that consists of two main components: the drop-probe assembly and the control box. The standard unit can provide a stroke of up to 4-inches and…
-
Dual-Solenoid Air Valves for Full-Revolution Presses (RCD140)
$2,433.88This 1/4″ monitored dual-solenoid air valve is ideal for operating air cylinders on full-revolution presses. It is equipped with a pressure switch with both normally open (NO) and normally closed (NC) contacts to provide feedback to the control system indicating whether the valve is in the ready-to-run condition or has experienced an abnormal function. This…
-
Dual-Solenoid Air Valves for Mechanical Power Presses and Press Brakes
$2,037.02 – $7,719.61These monitored dual solenoid air valves are ideal to use on mechanical power presses and other potentially hazardous machinery that utilize a pneumatically controlled clutch and brake mechanism. Each valve has two valve elements independently controlled by two solenoid pilots. The two valve elements share common inlet, outlet, and exhaust ports. When the pilot valves…
-
-
Cable and Push-Button E-Stop Assembly (CML510)
$1,267.04CML510 Assembly Includes:
• Cable and Push-Button E-Stop Switch
• Indicator Light and Bulb
• 7 Yards of Red PVC-Covered Steel Cable
• Tension Kit -
Emergency Stop Safety Relay – Single Channel (RFT148)
$622.32An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Electrical Plug Lockout Container (KYM088)
$85.70This lockout container can lock out plugs up to 3″ wide and 5 1/2″ long with a maximum cord diameter of 1 1/4″. The lockout consists of a round container and two cover plates made of a durable and chemically resistant thermoplastic. The cover plates, when used singularly or combined, are locked to produce a…
-
Electrical Plug-out (KYM983)
$148.98Two Step Close, Slide Assembly, Electrical Plug-out This lockout container accepts lockout plugs up to 2 3/4″ wide and 4 3/4″ long with a maximum cord diameter of 2 3/4″. It is constructed of high-impact, yellow UV-stabilized polymer. It has an easy to use two-step close and slide assembly. It allows the use of four…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,032.36An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Die Safety Block Electrical Interlock
$457.51 – $945.34According to ANSI B11.19-2003, safety blocks “shall be interlocked with the machine to prevent actuation of hazardous motion of the machine.” The following interlock systems will satisfy this requirement. The electrical interlock system for die safety blocks must be interfaced into the control system so that when the plug is pulled, the power to the…
-
Enclosed Transformers
$491.79 – $605.17Direct Frame-Mounting Station, Enclosed Transformers These transformers comply with OSHA regulations and ANSI standards and are available for use when the motor start/stop station is remotely located from the starter enclosure, and voltage to these buttons must be 115 V or less. These transformers mount directly to the frame of the machine. If the existing…
-
Energy Source ID Tags
$4.09 – $11.21Energy Source Attachment ID Tags for Hazard Awareness These tags can be used to identify the different hazardous energy sources associated with machinery throughout a plant or factory. They can be permanently or temporarily attached at the energy source. These tags can be used in conjunction with a company’s energy control program. All tags are…
-
Ergonomic Safeball Ball and Socket Mount (FKT301)
$276.88THIS PRODUCT HAS A 10-DAY LEAD TIME The FKT301 is designed to be used with the ergonomic Safeball palm button (CTC773). It is a flexible ball joint mount that offers tilt and rotation for increased ergonomic support.
-
-
EX-AL™ Hinges and Ball Lock Pin
$26.70 – $374.44Hinges are used to swing guard panels and segments to the right or left. They are attached to the aluminum extrusion anywhere along the T-slot with button-head or socket-head cap screws and T-nuts (furnished). Standard aluminum hinges and lift-off hinges are available. This specially designed hinge assembly is used on the light curtain swing-away mounting…
-
EX-AL™ Joining-and-Locking-Plates
$8.57 – $56.69A variety of brackets, plates, clamps, bolts, bearings, rollers, etc., are available for attaching guards to machines and for guard assemblies. Joining plates are used to connect extruded panels without additional machining. Joining strips and plates are used to connect extrusions to one another or to machines. The standard sizes of most of these mounting…
-
EX-AL™ Linear Bearings and Channel Guide
$44.82 – $118.66Linear bearings and channel guides are used in applications such as sliding panels or gates. These cost-effective alternatives to traditional bearings can be used in both low and high acceleration/deceleration applications. Linear bearings mate and glide on T-Slot aluminum extrusion profiles and the bearing pads are self-lubricating for smooth linear motion.
-
EX-AL™ Mounting Brackets
$23.07 – $88.33Mounting brackets are used for attaching extrusion-constructed guards to one another or to machines. The standard sizes of most of these mounting brackets are .188 thick 6063 aluminum alloy, clear anodized with .257 diameter holes on 1.0″ center lines.
-
EX-AL™ Panel Retainer (FKT560)
$28.02The panel retainer holds mesh in the extruded-aluminum framework of the guard. This retainer prevents panel push out and is the strongest way to hold panels in place.
-
EX-AL™ Perimeter Guarding Steel Hairpins
$0.00 – $19.78*PLEASE NOTE* The Hairpin Clip Assembly FKT753 is ordered separately. Steel hairpins are used in the adjustable area of a perimeter guarding panel and are constructed of black-oxidized steel. These hairpins are 1/4-inch round rods on 3/4-inch centers (1-inch wide from outside to outside) which create a 1/2-inch opening between hairpins). Hairpins provide adjustability of…
-
EX-AL™ T-Handle Hex Wrenches
$35.59 – $36.92The T-handle hex wrench is an ideal way to tighten and loosen button-head cap screws and socket-head cap screws. The handle has a cushion grip and the long arm (approx. 7 1/8″ arm / 9″ total w/handle) provides access to hard to reach areas. The end of the hex wrench is ball-shaped which allows for…
-
EX-AL™ T-Nuts, Fasteners and End Caps
$0.50 – $13.84EX-AL™ Various T-Nuts, Fasteners and End Caps T-nuts allow joining plates, panels, hinges, and other accessories to be bolted into the T-slot of any of the extrusions. They are made of hardened steel and are coated with corrosion-resistant black oxide. Standard T-nuts slide into the T-slot from the end. The drop-in style allows the T-nut…
-
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
