Archives: Shop
Showing 97–120 of 310 results
-
-
Modular Emergency Stop Control System – Terminating Cable (FDK316)
$77.59The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Wired Push Button Station
$547.80 – $645.57The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Adjustable Floor Stand for Control Bar or Palm Button Assembly (KCL017)
$1,219.74The adjustable column (28″ to 47″) on this floor stand can easily be moved up and down for operator comfort. A hand tool is required to make adjustments. The base has four holes for permanent attachment to the floor; bolts are not furnished. Custom heights are available. Please consult the factory.
-
Die Safety Block Adjustable Screw Device for Octagons
$1,326.82 – $2,661.40A steel heavy-duty adjustable screw device is added to octagonal-shaped die safety blocks. These screws are needed to prevent any space between the block and die when various dies are used or when the slide is adjusted. To learn more about die blocks, we invite you to read our blog post “Demystifying Die Safety Blocks.”…
-
-
Small, Steel, Lathe Chuck Shields
$766.60 – $991.62These sturdily constructed small steel lathe chuck shields are fabricated of 18-gauge steel with reinforced sides and can be used on smaller lathes that have up to 18 1/2″ diameter chucks. Each shield is furnished with a 1″ x 13″ mounting rod which can be cut to length if required. This mounting rod is fastened…
-
Large Steel Lathe Chuck Shields
$2,290.52 – $4,937.93The large steel lathe chuck shields are made of fabricated 18-gauge steel with reinforced sides. They can be used on lathes that have chucks up to 47-inches in diameter. They are double hinged for access to the chuck, workpiece, and tool. The front hinged portion can be swung up for workpiece changes, and the entire…
-
Crosslide-Travel Lathe Shields With Reinforced Steel and High-Impact Polycarbonate Window
$914.03 – $1,295.78These crosslide-travel lathe shields mount on and travel with the crosslide for protection when machining long workpieces. The 18-guage reinforced steel housing provides protection from flying chips and coolant. The high-impact polycarbonate window permits visibility into the point of operation. The front portion of the lathe shield hinges up for access. These shields are ideal…
-
Sliding Lathe Shields
$4,314.09 – $5,622.29Heavy-duty sliding lathe shields are furnished in four different sizes. They are constructed of high quality, reinforced 12-gauge steel with a polycarbonate window. These shields are available for operator protection on large standard lathes, CNC machines, and OD grinders. The shields are designed to fit lathes with chucks up to 48 inches in diameter. Four…
-
Universal Ball-and-Socket Chip Shields
$487.28 – $743.34Versatile, Various Sizes, Universal Ball-and-Socket Chip Shields A variety of these quality-constructed, universal ball-and-socket chip shields are available. These versatile shields are ideal for mills, drills, grinders, band saws, or similar equipment including woodworking machines. The shield places a barrier between operators or other employees in the area and the flying chips (swarf), sparks, and…
-
Safety Chip Shields with Direct-Mount Flexible Arm
$186.21 – $442.27The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…
-
Safety Chip Shields with Magnetic-Mount Flexible Arm
$229.68 – $487.28The shield can be used on lathes, drill presses, milling machines, grinders, band saws, woodworking machines, and similar equipment. It places a barrier between an operator and flying chips (swarf), sparks, and splashing coolant generated at the point of operation. The transparent portion of these flexible-arm shields is constructed of high-impact-resistant, 3/16″-thick polycarbonate. Special shield…
-
Heavy-Duty Aluminum Drill Press Shields
$560.22 – $820.93These cast-aluminum drill press shields are furnished with a standard 1 3/4-inch bore. The user can bore this shield to a size of up to 3 1/2-inches for attaching to the quill of a drilling machine. This drill press shield is available in 2-tier or 3-tier models which provides 3- to 6-inches travel of the…
-
Adjustable-Slide Safety Shields
$186.21 – $209.50These high-quality adjustable slide shields can be used on drills, mills, saws, or special machine applications. The transparent portion of these shields is constructed of durable, clear 3/16″-thick poly-carbonate. The shield places a barrier between an operator and the flying chips (swarf), sparks, and coolant generated at the point of operation. These shields can be…
-
-
Articulated Palm Button Assemblies
$2,521.72 – $3,313.16To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be used as a point-of-operation safeguard. These palm…
-
Band Saw Shields
$273.13 – $282.446-inch high x 6-inch wide L-shaped shield (4-inch deep) These high-quality band saw shields place a barrier between an operator and flying debris generated at the point of operation of the band saw. The transparent, L-shaped portion of the shield is constructed of high-impact-resistant, 3/16-inch-thick clear polycarbonate. Flexible spring-steel arms come in standard lengths of…
-
Belt Sander Shields
$100.87 – $369.33These high-quality, adjustable belt sander shields place a barrier between an operator and flying debris generated at the point of operation. They fasten directly to the machine using 1″ x 2″ extruded aluminum with mounting hardware included. The transparent portion of the shield is constructed of high-impact-resistant, 3/16″-thick clear polycarbonate. Easy vertical adjustment of the…
-
Bench Grinder Safety Gauge (KSC096)
$40.35The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. OSHA 29 CFR 1910.215…
-
Bench Grinder Safety Gauge with Tether (KSC096T), (Includes SS Tether)
$66.73The bench grinder safety gauge is laser-cut, Grade 5052 aluminum with H32 hardness. The safety yellow, durable powder-coated gauge has silk-screened text and graphics. The bench grinder safety gauge measures 2 3/4-inches wide by 2 1/4-inches high by .1000-inches thick and has a 1/4-inch hole for attachment to the bench grinder. The bench grinder gauge…
-
Bench Grinder Safety Shields with Direct-Mount Flexible-Arm
$218.82 – $282.44Double- and Single-wheel bench grinder shields are available to attach to bench grinders. Double-wheel bench grinder shields provide protection for both wheels of the grinder with one continuous shield. The durable shield is made of clear, 3/16-inch-thick polycarbonate and measures 18-inch x 6-inch. A special shield bracket adds stability to the top of the shield….
-
Bench Grinder Safety Shields with Magnetic-Mount Flexible-Arm
$262.26 – $324.33Double- and Single-wheel shields are designed to attach to bench grinders. The double-wheel grinder shield provides protection for both wheels of the grinder with one continuous shield. The durable shield is made of clear, 3/16-inch-thick polycarbonate and measures 18-inch x 6-inch. A special shield bracket adds stability to the top of the shield. The single-wheel…
-
Chrome, Light-Push Button (CTC737)
$612.97This heavy-duty, light-push, single plunger run/inch palm button provides 1 NO and 1 NC contact arrangement. This 2 1/2″ button is constructed of zinc cast and has a flat plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. This palm button can be used instead of…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2024. All Rights Reserved By Rockford Systems LLC
