Archives: Products
Showing 193–216 of 248 results
-
Replacement Safety Shields for Lathes, Small Steel Chuck
$104.16 – $127.89The Small Steel Lathe Chuck Replacement Shields, Individual Part is designed to replace existing worn-down shields in order to optimize safety levels. Product Manual Download the Product Manual PDF
-
Replacement Safety Shields for Lathes, Transparent Chuck
$232.05 – $742.56NOTE: LXS Series Lathe Chuck Shields are *Marked for Discontinuation* until inventory is depleted. Replacement transparent shields and mounting arms will be supported and supplied through January 1, 2024 or until inventory is depleted. Replacement Lathe Chuck Shields for LXS Series are the Protector™ Series Shields: Please see the links below for direct replacement options….
-
Replacement Safety Shields For Standard-Mount Grinders
$38.24 – $67.24Standard-Mount Grinder Replacement Shields, Individual Part The Standard-Mount Grinder Replacement Shields, Individual Part are to replace existing and worn-down shields to optimize safety levels. The polycarbonate replacement window is designed to fit original standard-mount grinder shields: GWG201 – Standard-Mount Grinder Shield (6 1/4″H x 5 1/4″W shield with nylon frame), replacement polycarbonate window GWW001 GWG202…
-
Replacement Upper Belt Sander Shield Only (L-Shaped) (KYL227)
$112.07The Replacement Upper Belt Sander Shield Only (L-Shaped) (KYL227) is designed to replace existing shields that show signs of wear, to optimize safety. Product Manual Download the Product Manual PDF
-
Replacement Window for DZS Shields (DZS002)
$25.38These shields are designed to be used with DZS compatible machinery, and to replace old shields that have evident wear and tear, in efforts to optimize safety. Product Manual Download the Product Manual PDF
-
Replacement Windows for Sliding Lathe Shields
$94.93 – $108.11Windows are designed to be used when existing shields on lathe machinery is worn and therefore, through shield replacement, the safety levels can be maximized. Product Manual Download the Product Manual PDF
-
Right Angle Rigid In-Line Actuator (CMC547A)
$68.56In-line safety actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Rigid In-Line Actuator (CMC549A)
$54.06In-lin safety actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Rigid-Arm Magnetic Base Chip Shields
$212.27 – $465.42The magnetic base chip shields can be used on lathes, small milling machines, drills, grinders, band saws, etc. These shields can be attached to any ferrous surface on the machine by an 80-lb. pull magnetic base. If a flat, smooth, ferrous surface is not available, a mounting plate (3 1/2″ x 4 5/8″) is also…
-
Riveter and Welder Safety – Adjustable Stroke Detect-a-Finger® Drop-Probe Device
$3,222.33For Safeguarding Riveters, Spot Welders, Eyeletters, Stakers, Staplers, Crimpers, Fastening and Assembly Machines Riveter and Welder Safety The Detect-A-Finger is a cost-effective solution to help protect the operator’s fingers from pinch-point hazards. The DAF100 Adjustable Stroke Detect-A-Finger® drop-probe device for riveters and welders reduces accidents at the point of operation where the operator’s fingers can…
-
Warning Label for Rotating Gears and Pulley (KST181)
$16.81Rotating Gears and Pulley Danger Labels (KST181) are designed to raise awareness of the dangers with rotating gears and pulleys. Ex. “You are exposed to moving machine parts that can crush, dismember, and cause death.”
-
Rubber Panel Gasket 10SERIES (GSKT10)
$0.46The rubber gasket tightly holds the poly-carbonate panels in the T-slot of the extruded aluminum. This gasket is made of high-grip rubber and is easily inserted into the T-slot after the panel is assembled in the frame. Poly-carbonate panels (3/16″-thick) are secured with the gasket on one side of the panel. The gasket material is…
-
Safety Bumper
$569.58 – $1,245.94This safety bumper system is designed to protect someone or something from hazardous machine conditions. A safety bumper and a safety interface control provides a Category 3 safety system. The bumper is an industrial grade, pressure-sensitive safety device with a built-in sensor, and is supplied with 4-lead wiring. When a person or object comes in…
-
Safety Bumper Control Interface (RKR164)
$2,540.68The safety bumper control interface (Part No. RKR164) consists of a safety controller, power supply, force-guided relays, terminals, and fuses all inside an enclosure for bumper switches. An on/off selector switch and a lighted reset push button are on the front of the enclosure. If the safety bumper is pressed and stops machine motion, then…
-
Safety Distance Guide Slide Chart
$23.07This slide chart calculates the safety distance for mounting two-hand trip, two-hand control, and presence-sensing devices on machinery.
-
-
Safety Mat Junction Boxes
$1,019.18 – $1,255.17Safety Mat Junction Boxes with Easy Tie-In for Grouping up to 10 safety mats. Part No. RKR-021 Mat junction box can provide wiring for up to 10 mats for easy tie-in to the mat control. (Cover has been removed for photo.) If multiple mats are grouped together to provide auxiliary or perimeter (work-envelope) safeguarding, junction…
-
Self-Ejecting Lathe Chuck Wrenches
$334.88 – $428.50Lathe chuck wrenches help prevent one of the most common accidents on lathes: when a chuck wrench (or key) is thrown from the chuck. This happens when someone forgets to remove the chuck wrench from the chuck before the machine is turned on. A self-ejecting, spring-loaded chuck wrench can be used on lathes or other…
-
Sensing-Saf-Start®
$510.25 – $657.91Power Interruption Immune, Sensing-Saf-Start® Package The Sensing-Saf-Start® package is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the Saf-Start® package will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset…
-
-
Single-Phase Nonreversing Magnetic Motor Starter, 2 HP Max (CSF301)
$1,120.69The 115VAC, 30A non-reversing magnetic motor starter, self-latching red emergency-stop palm button, green motor control on push button and red motor control off push button are housed in a NEMA 12 enclosure. Enclosure size is 8″ x 6″ x 6″. It can be used for machines with 115VAC power and is rated up to 2…
-
Single-Phase Starter With Self-Latching Emergency-Stop Button, 1/2 HP Max (CSF082)
$510.25The 115VAC, 20A non-reversing magnetic motor starter, self-latching red emergency-stop palm button, green motor control on push button and red motor control off push button are housed in a NEMA 4 polycarbonate enclosure. Enclosure size is 5″ x 5″ x 4″. It can be used for machines with 115VAC power and is rated up to…
-
-
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
