rockford-combustion-logo

Sensing-Saf-Start® Protects Machine Operators from Accidental Re-Starts following Power Interruptions

Anti-Restart Protection Required by Occupational Health and Safety Administration (OSHA)

Drills, mills, lathes, grinders, saws and other 120V machinery can abruptly shut down during operation due to a power interruption. When an unintentional shut down takes place, it is critically important that a machine does not automatically restart, catching the operator by surprise and leading to a serious accident.

Sensing Saf Start Emergency StopSensing-Saf-Start® motor controls from Rockford Systems LLC help industrial users achieve higher levels of safety by preventing accidental machine start-ups after a voltage drop or power interruption. In the event of a power interruption, the Sensing-Saf-Start automatically disconnects power to the machine, so that when it is restored, the machine will not start up even if the power switch is in the “ON” position. It is only after the reset button has been pressed by the machine operator on the Sensing-Saf-Start that the machine can be restarted and normal operation resumed. Also available without an emergency stop (E-stop).

Extremely simple to install, the Sensing-Saf-Start instantly upgrades older machines to the latest safety standards, sparing the user the expense of purchasing a new machine. They are also ideal for replacing old, frayed or ungrounded power cords. The Sensing-Saf-Start is for use with equipment driven by small motors operating on 120V AC, and that are connected to a power source by means of 14 gauge, 3 wire flexible cord.

The Sensing-Saf-Start can be purchased as a package (SAFS-200) that includes a 120V AC Sensing-Saf-Start with a 20″ cord for the machine end and an 8′ cord with molded plug on the power end, plus an E-stop in a NEMA-4 polycarbonate enclosure. Or the Sensing-Saf-Start can be bought individually (SAFS-100) without the E-Stop.

The Sensing-Saf-Start complies with OSHA requirements, the Canadian Electrical Code, and NFPA 79 and ANSI B11 series electrical standards.

MEDIA CONTACTS

Kari Larson
Rockford Systems, LLC
800-922-7533
kari.larson@rockfordsystems.com

Dan O’Connell
O’Connell Communications
708-363-6118
dan@oconnellpr.com

September 11, 2017

Share this post

Media Contacts

Kari Larson
Rockford Systems, LLC
800-922-7533
kari.larson@rockfordsystems.com

Dan O’Connell
O’Connell Communications
708-363-6118
dan@oconnellpr.com

Logo Guidelines

Related Articles
Rockford Combustion Solutions provides fuel-train management and combustion-safety solutions for safety-conscious organizations that work with fuel-fired equipment in thermal processes.

Combustion Solutions Include:
• Consultative inspections and Assessments
• Complex Engineering Services
• Technical safety training
• High-quality Burners
• Standard and Engineered-to-Order (ETO) Valve Trains
• Controls and Components

We Enable Organizations to Improve:
• NFPA compliance
• Worker Safety
• Efficiency and Air Quality
• Reduce the risk of fires and explosions.

Rockford Combustion
5795 Logistics Parkway
Rockford, Illinois USA 61109