Die Safety Block Adjustable Screw Device for Octagons
$1,379.89 – $2,767.86
Product Description
A steel heavy-duty adjustable screw device is added to octagonal-shaped die safety blocks. These screws are needed to prevent any space between the block and die when various dies are used or when the slide is adjusted.
To learn more about die blocks, we invite you to read our blog post “Demystifying Die Safety Blocks.”
Note: If an adjustable screw device is mounted to an octagonal safety block, you must use the approximate static loads shown in the chart. This is because the adjustable screw devices will not hold as heavy a static load as the octagonal safety blocks by themselves.
For octagonal die safety blocks only!
Contact Customer Service
Reach a Real Person @: 1-800-922-7533
Open Monday – Friday, 8:00am – 5:00pm CST
Same Day Support Response
Related Products
-
$185.61 – $1,145.87Select options This product has multiple variants. The options may be chosen on the product page -
$21.39Select options This product has multiple variants. The options may be chosen on the product page -
$203.35 – $477.71Select options This product has multiple variants. The options may be chosen on the product page
Rockford Products
PROTECTOR™ Series Shields (RSS)
Hydraulic Press Brake Controls (RHPS)
Mechanical Press Brake Controls (PRS, RT)
Hydraulic Press Controls (RHPC)
Part Revolution Clutch Press Controls (PRC)
Full Revolution Clutch Press Controls (FPA, FPG, FBH)
Milling Machine Draw Bar Cover (DBC001)
Slide and Swing-Aside Shields
200-lb Pull Air Cylinder (RCL003)
100-lb Pull Air Cylinder (RCL002)
50-lb Pull Air Cylinder (RCL001)
On/Off Magnetic Base Only With M12 Tap (FKT285)
Mounting Plate For Magnetic-Base Shields
Flat Mounting Bracket for 18-inch x 6-inch Shield
Dual-Solenoid Air Valves for Full-Revolution Presses (RCD140)
Manual Pilot Air Lockout Valves
1/2″ Strainer, 100# Mesh, Class 300, FNPT
¾” Strainer, 100# Mesh, Class 300, FNPT
1″ Strainer, 100# Mesh, Class 300, FNPT, Ductile Iron Body
1.5″ Strainer, 100# Mesh, Class 300, FNPT
2″ Strainer, 100# Mesh, Class 300, FNPT
Jomar, T-100NE, 100-708, Valve, 2″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
Siemens, 1-1/2″ NPT Single Safety Shut-off Valve
Siemens, 1″ VGG Safety Shut-off Valve, Max Operating Pressure, 20 PSI, UL Listed, FM Approved and CSA Certified
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed
Siemens, No Switches, Safety Actuator, 120VAC, NEMA 12
Siemens, Gas Actuator Sealing Kit for SKP Actuators, NEMA 3, NEMA 3R, and NEMA 4 protection
Siemens, SKP Heating Element, Automatic Set Thermostat (on at 25°F, off at 50°F)
Siemens, Proof Of Closure & Auxiliary Switches Safety Actuator, 120VAC, NEMA 12
Siemens, Proof Of Closure Only Switch Safety Actuator, 120VAC, NEMA 12
Jomar, T-100NE, 100-704, Manual Isolation Valve, .75″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
1/2″ NPT Needle Valve, 2 INWC full open pressure drop at 150 SCFH Natural Gas
Siemens, 2″ NPT Single Safety Shut-off Valve
Jomar, Lift-N-Lock, 210-996C, 1″ – 1-1/4″ Ball Valve Locking Kit
Jomar, Lift-N-Lock, 210-994C, 1/4″ – ½” Ball Valve Locking Kit, Closed Position
Jomar, T-100NE, 100-707, Valve, 1.5″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed, Shut-off, 0-50 PSI, 120/110VAC, 60/50 Hz (UL, FM, CSA)