ANX 70 Series – Flexfire® Burner
ANX70″Anti NOx® Air burner is a trademark of Anderson Thermal Solutions (Suzhou) Co., Ltd., it is designed for automobile dryer ovens with staged combustion air, with low NOx emission level and good combustion efficiency. Anderson owns its IP and copyright. The heat input ranges from 7 ” 900 kW, with a max. oven temperature at 950°C. Good for automobile dryer ovens and food indirect heating applications.
Product Description
- Max input was tested with a clean combustion air blower filter
- Above data is from the lab, actual data may vary by oven dimension and condition
- Heat input is based on net heat value (HHV) and normal condition: 1 atmosphere, 20°C.
- Anderson Thermal Solutions (Suzhou) Co., Ltd reverse rights for modification without notice.
Contact Customer Service
Reach a Real Person @: 1-800-922-7533
Open Monday – Friday, 8:00am – 5:00pm CST
Same Day Support Response
- Max input was tested with a clean combustion air blower filter
- Above data is from the lab, actual data may vary by oven dimension and condition
- Heat input is based on net heat value (HHV) and normal condition: 1 atmosphere, 20°C.
- Anderson Thermal Solutions (Suzhou) Co., Ltd reverse rights for modification without notice.
Emission data is from the lab’s actual test, test condition as:
- 950°C Oven temperature
- Excess air 3% O2
ANX70 Series Installation Dimension
ANX70 Series burner installation dimension shown as follows:
Rockford Products
PROTECTOR™ Series Shields (RSS)
Hydraulic Press Brake Controls (RHPS)
Mechanical Press Brake Controls (PRS, RT)
Hydraulic Press Controls (RHPC)
Part Revolution Clutch Press Controls (PRC)
Full Revolution Clutch Press Controls (FPA, FPG, FBH)
Milling Machine Draw Bar Cover (DBC001)
Slide and Swing-Aside Shields
200-lb Pull Air Cylinder (RCL003)
100-lb Pull Air Cylinder (RCL002)
50-lb Pull Air Cylinder (RCL001)
On/Off Magnetic Base Only With M12 Tap (FKT285)
Mounting Plate For Magnetic-Base Shields
Flat Mounting Bracket for 18-inch x 6-inch Shield
Dual-Solenoid Air Valves for Full-Revolution Presses (RCD140)
Manual Pilot Air Lockout Valves
1/2″ Strainer, 100# Mesh, Class 300, FNPT
¾” Strainer, 100# Mesh, Class 300, FNPT
1″ Strainer, 100# Mesh, Class 300, FNPT, Ductile Iron Body
1.5″ Strainer, 100# Mesh, Class 300, FNPT
2″ Strainer, 100# Mesh, Class 300, FNPT
Jomar, T-100NE, 100-708, Valve, 2″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
Siemens, 1-1/2″ NPT Single Safety Shut-off Valve
Siemens, 1″ VGG Safety Shut-off Valve, Max Operating Pressure, 20 PSI, UL Listed, FM Approved and CSA Certified
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed
Siemens, No Switches, Safety Actuator, 120VAC, NEMA 12
Siemens, Gas Actuator Sealing Kit for SKP Actuators, NEMA 3, NEMA 3R, and NEMA 4 protection
Siemens, SKP Heating Element, Automatic Set Thermostat (on at 25°F, off at 50°F)
Siemens, Proof Of Closure & Auxiliary Switches Safety Actuator, 120VAC, NEMA 12
Siemens, Proof Of Closure Only Switch Safety Actuator, 120VAC, NEMA 12
Jomar, T-100NE, 100-704, Manual Isolation Valve, .75″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
1/2″ NPT Needle Valve, 2 INWC full open pressure drop at 150 SCFH Natural Gas
Siemens, 2″ NPT Single Safety Shut-off Valve
Jomar, Lift-N-Lock, 210-996C, 1″ – 1-1/4″ Ball Valve Locking Kit
Jomar, Lift-N-Lock, 210-994C, 1/4″ – ½” Ball Valve Locking Kit, Closed Position
Jomar, T-100NE, 100-707, Valve, 1.5″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed, Shut-off, 0-50 PSI, 120/110VAC, 60/50 Hz (UL, FM, CSA)