Archives: Shop
Showing 1–24 of 247 results
-
-
Ejection Curtain Guarding Kits for Presses
$3,469.14 – $4,066.67Ejection Curtain Guarding Kits for Presses are designed for organizations that require a superior hydraulic press safety solution to help protect their employees and prevent injuries caused by flying, rolling or sliding debris. Most commonly used on H-presses or compacting presses that are hydraulic powered, the ejection curtains are coiled-wire fabric machine guards, widely used…
-
Foot Switch Orange (CTD088)
$828.12Keeps operators hands free from machinery by using cast-iron foot switches, designed for use on machinery with proper “Point of Operation” and “Pinch Point” guarding devices in place. This foot switch is protected from unintentional operation. A die-cast cover protects the top and both sides, and the front is protected by a hinged flap. The…
-
-
-
-
KYL019 Replacement Shield Equivalents
$799.16 – $2,587.71THE PROTECTOR™ SERIES SHIELDS The Milling Machine Chip Shields will be supported and supplied through January 1, 2024, or until inventory is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered in curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements…
-
KYL059 Replacement Shield Equivalents
$873.82 – $2,987.59THE PROTECTOR™ SERIES SHIELDS The Milling Machine Chip Shields will be supported and supplied through January 1, 2024, or until inventory is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered in curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements…
-
LXS300 Series Replacement Shield Equivalents
$317.76 – $1,479.47THE PROTECTOR™ SERIES SHIELDS The LXS Series Shield will be discontinued when the current stock is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered as curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements for the LXS300 Shields. BASIC…
-
LXS400 Series Replacement Shield Equivalents
$333.17 – $1,546.78THE PROTECTOR™ SERIES SHIELDS The LXS Series Shield will be discontinued when the current stock is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered as curved, octogonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements for the LXS400 Shields. BASIC…
-
LXS500 Series Replacement Shield Equivalents
$362.70 – $1,614.12THE PROTECTOR™ SERIES SHIELDS The LXS Series Shield will be discontinued when the current stock is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered as curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements for the LXS500 Shields. BASIC…
-
LXS600 Series Replacement Shield Equivalents
$388.60 – $1,685.29THE PROTECTOR™ SERIES SHIELDS The LXS Series Shield will be discontinued when the current stock is depleted and can be replaced with The Protector™ Series. The Protector™ Series Shields are offered as curved, octagonal, interlocked, and interlocked and lighted forms. This list includes the various forms of direct replacements for the LXS600 Shields. BASIC…
-
-
-
-
-
Protector Series Shields (RSS)
All Interlocked PROTECTOR Series Shields must be integrated into a proper motor starter that operates with a 120V coil, and requires actuation of the motor start pushbutton in order to re-start the machine after actuation of the interlock switch, or in the event of a power source failure. -
PROTECTOR™ Series Light Curtain Mirrors
$456.85 – $1,186.35NEW Protector™ Series Mirrors are used to guard the perimeter of a work cell, whereby corner mirrors can be set up to reflect the sensing field from the emitter, around the perimeter’s corners, to the receiver. Using corner mirrors is an economical way to make use of the range of a PROTECTOR Series Light Curtains…
-
-
S3000 Safety Laser Scanner
Features Meets industry OSHA, ANSI, UL, IEC, and EN safety standards 3 models to choose from—standard, advanced, and professional Selectable resolutions—30 mm (1.18″), 40 mm (1.58″), 50 mm (1.96″), 70 mm (2.75″), and 150 mm (5.9″) 190° scanning angle Protective field scanning range radius up to 23′ (7 m) Warning field scanning range radius up…
-
Unitrol SOFT TOUCH Pinch-Point Safety System for Riveters
$8,221.82Please note this item has an extended lead time (about 4 weeks). Please call for installation quote if interested in Rockford Systems installation. The SOFT TOUCH Pinch-Point Safety System is the first and only fully passive safeguarding equipment designed to prevent a pneumatic riveter, welder or other small machine from applying full force if it…
-
-
Automatic Sanding Belt Holder
$3,886.84 – $4,543.83The automatic sanding belt holder enables lathe operators to sand, polish and deburr without using their hands for work execution, keeping hands away at a safe operating distance. The holder is available in 25mm and 50mm sizes and can hold belts of different sizes and abrasion grits. The sanding belt holder meets ISO 23125 6.2.1.P…
-
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
