Milling Machine Draw Bar Cover (DBC001)
$187.23
Product Description
This Draw Bar Cover (part #DBC001) protects vertical mill workers from rotating shafts below 7 feet off the ground. It guards the turning draw bar with a non-rotating, smooth, welded-steel enclosure, secured firmly to the mill with a powerful ring magnet and safety anchor chain. Simple to install, the draw bar cover prevents clothing, hair or hands from being grabbed by the moving shaft.
This Draw Bar Cover has a welded-steel enclosure with a 4.95″ base diameter, a 7.125″ extrusion and weighs 4 pounds. It comes with a 24″ zinc-plated steel safety chain.
Contact Customer Service
Reach a Real Person @: 1-800-922-7533
Open Monday – Friday, 8:00am – 5:00pm CST
Same Day Support Response
Related Products
-
-
$2,622.59 – $3,445.69Select options This product has multiple variants. The options may be chosen on the product page -
$2,433.79 – $2,725.88Select options This product has multiple variants. The options may be chosen on the product page
Rockford Products
PROTECTOR™ Series Shields (RSS)
Hydraulic Press Brake Controls (RHPS)
Mechanical Press Brake Controls (PRS, RT)
Hydraulic Press Controls (RHPC)
Part Revolution Clutch Press Controls (PRC)
Full Revolution Clutch Press Controls (FPA, FPG, FBH)
Milling Machine Draw Bar Cover (DBC001)
Slide and Swing-Aside Shields
200-lb Pull Air Cylinder (RCL003)
100-lb Pull Air Cylinder (RCL002)
50-lb Pull Air Cylinder (RCL001)
On/Off Magnetic Base Only With M12 Tap (FKT285)
Mounting Plate For Magnetic-Base Shields
Flat Mounting Bracket for 18-inch x 6-inch Shield
Dual-Solenoid Air Valves for Full-Revolution Presses (RCD140)
Manual Pilot Air Lockout Valves
1/2″ Strainer, 100# Mesh, Class 300, FNPT
¾” Strainer, 100# Mesh, Class 300, FNPT
1″ Strainer, 100# Mesh, Class 300, FNPT, Ductile Iron Body
1.5″ Strainer, 100# Mesh, Class 300, FNPT
2″ Strainer, 100# Mesh, Class 300, FNPT
Jomar, T-100NE, 100-708, Valve, 2″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
Siemens, 1-1/2″ NPT Single Safety Shut-off Valve
Siemens, 1″ VGG Safety Shut-off Valve, Max Operating Pressure, 20 PSI, UL Listed, FM Approved and CSA Certified
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed
Siemens, No Switches, Safety Actuator, 120VAC, NEMA 12
Siemens, Gas Actuator Sealing Kit for SKP Actuators, NEMA 3, NEMA 3R, and NEMA 4 protection
Siemens, SKP Heating Element, Automatic Set Thermostat (on at 25°F, off at 50°F)
Siemens, Proof Of Closure & Auxiliary Switches Safety Actuator, 120VAC, NEMA 12
Siemens, Proof Of Closure Only Switch Safety Actuator, 120VAC, NEMA 12
Jomar, T-100NE, 100-704, Manual Isolation Valve, .75″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
1/2″ NPT Needle Valve, 2 INWC full open pressure drop at 150 SCFH Natural Gas
Siemens, 2″ NPT Single Safety Shut-off Valve
Jomar, Lift-N-Lock, 210-996C, 1″ – 1-1/4″ Ball Valve Locking Kit
Jomar, Lift-N-Lock, 210-994C, 1/4″ – ½” Ball Valve Locking Kit, Closed Position
Jomar, T-100NE, 100-707, Valve, 1.5″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed, Shut-off, 0-50 PSI, 120/110VAC, 60/50 Hz (UL, FM, CSA)