Function-Testing Checklist for Point-of-Operation Barrier Guarding (LLL058)
$18.96
Product Description
Barrier guards should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This point-of-operation barrier guard function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine.
The checklist has the function-testing procedures on the front; the back contains the OSHA and ANSI guard-opening requirements and the ANSI B11.19-2003 safety-distance equation for non-locking barrier guards.
Contact Customer Service
Reach a Real Person @: 1-800-922-7533
Open Monday – Friday, 8:00am – 5:00pm CST
Same Day Support Response
Related Products
-
$37.13Select options This product has multiple variants. The options may be chosen on the product page -
$37.13Select options This product has multiple variants. The options may be chosen on the product page -
$20.57Select options This product has multiple variants. The options may be chosen on the product page -
$20.57Select options This product has multiple variants. The options may be chosen on the product page
Rockford Products
PROTECTOR™ Series Shields (RSS)
Hydraulic Press Brake Controls (RHPS)
Mechanical Press Brake Controls (PRS, RT)
Hydraulic Press Controls (RHPC)
Part Revolution Clutch Press Controls (PRC)
Full Revolution Clutch Press Controls (FPA, FPG, FBH)
Milling Machine Draw Bar Cover (DBC001)
Slide and Swing-Aside Shields
200-lb Pull Air Cylinder (RCL003)
100-lb Pull Air Cylinder (RCL002)
50-lb Pull Air Cylinder (RCL001)
On/Off Magnetic Base Only With M12 Tap (FKT285)
Mounting Plate For Magnetic-Base Shields
Flat Mounting Bracket for 18-inch x 6-inch Shield
Dual-Solenoid Air Valves for Full-Revolution Presses (RCD140)
Manual Pilot Air Lockout Valves
1/2″ Strainer, 100# Mesh, Class 300, FNPT
¾” Strainer, 100# Mesh, Class 300, FNPT
1″ Strainer, 100# Mesh, Class 300, FNPT, Ductile Iron Body
1.5″ Strainer, 100# Mesh, Class 300, FNPT
2″ Strainer, 100# Mesh, Class 300, FNPT
Jomar, T-100NE, 100-708, Valve, 2″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
Siemens, 1-1/2″ NPT Single Safety Shut-off Valve
Siemens, 1″ VGG Safety Shut-off Valve, Max Operating Pressure, 20 PSI, UL Listed, FM Approved and CSA Certified
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed
Siemens, No Switches, Safety Actuator, 120VAC, NEMA 12
Siemens, Gas Actuator Sealing Kit for SKP Actuators, NEMA 3, NEMA 3R, and NEMA 4 protection
Siemens, SKP Heating Element, Automatic Set Thermostat (on at 25°F, off at 50°F)
Siemens, Proof Of Closure & Auxiliary Switches Safety Actuator, 120VAC, NEMA 12
Siemens, Proof Of Closure Only Switch Safety Actuator, 120VAC, NEMA 12
Jomar, T-100NE, 100-704, Manual Isolation Valve, .75″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
1/2″ NPT Needle Valve, 2 INWC full open pressure drop at 150 SCFH Natural Gas
Siemens, 2″ NPT Single Safety Shut-off Valve
Jomar, Lift-N-Lock, 210-996C, 1″ – 1-1/4″ Ball Valve Locking Kit
Jomar, Lift-N-Lock, 210-994C, 1/4″ – ½” Ball Valve Locking Kit, Closed Position
Jomar, T-100NE, 100-707, Valve, 1.5″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed, Shut-off, 0-50 PSI, 120/110VAC, 60/50 Hz (UL, FM, CSA)