Your go-to hub for product manuals, reference sheets, videos, safety definitions, FAQs, and expert articles to support your workplace safety and compliance efforts.
Frequently asked questions
Quick Answers to Common Workplace Safety Questions
Get clear, concise answers to common questions about Rockford Systems’ products, services, and safety solutions. Whether you’re seeking guidance on compliance, equipment, or workplace safety practices, our FAQ section is here to help. If you don’t find the answers you’re looking for, please contact us at the contact information provided below.
-
Are two-hand controls on floor stands required to be secured to the floor?
Yes. If two-hand controls serve as the point-of-operation safeguard, they must be anchored and located at the calculated safety distance. Choose robust operator interfaces and verify function before production with the Technical & Field Support team.
-
Can hand-feeding tools be used as point of operation safeguarding on mechanical power presses?
Hand-feeding tools are not a point-of-operation safeguard under OSHA 29 CFR 1910.212/1910.217 or ANSI B11.19. They may be used only as complementary aids to place or remove parts, while an engineered guard or device provides actual risk reduction. To verify compliance and document hazards, control reliability, and inspection intervals, schedule a professional Machine Safeguarding Assessment.
-
Can PSDI (presence-sensing device initiation) be used on mechanical power presses?
No. OSHA’s mechanical power press standard does not allow PSDI on mechanical power presses. Presence-sensing devices may be used as safeguards (e.g., light curtains) but not to initiate the stroke. Confirm safe distance and stopping performance with Stop-Time Measurement service.
-
Do I need a drill press guard, and what options are available?
Most drill presses require guarding of rotating components and the point of operation per OSHA 1910.212. Choose from heavy-duty aluminum shields for robust frontal protection, safety chip shields for containment near the tool, and flexible-arm magnetic shields to position protection precisely for different setups. Match the shield to chuck/quill size, stroke, and required access. Browse options in our Products Catalog.
-
Do you have distributors in Canada or do we order directly through you?
Orders are placed directly with Rockford Systems, which ensures correct product selection and direct access to engineering and support. Shop online or contact us at rockfordsystems.com.
-
Do you have model-specific shields for my machine?
We use a universal approach to shielding so you can fit common machines without waiting for OEM-specific guards. Selection guidance and fitment information are available in our Products Catalog.
-
Do you rent out stop-time measurement (STM) units?
STM units are available for purchase, and on-site measurements can be scheduled with our team. Book Stop-Time Measurement service for periodic validation and reporting.
-
Does adding a valve proving device improve safety?
Yes. Valve proving automatically verifies that gas safety shutoff valves fully close and seal when commanded. If leakage is detected, the system locks out for investigation. Integration details and test intervals can be planned through Leak Testing services.
-
Does Rockford Systems offer customized lockout/tagout procedures?
Yes. Equipment-specific procedures identify each energy source, isolation point, and verification step, delivered via Machine-Specific Procedures to keep machine documents consistent and mobile-accessible.
-
Does Rockford Systems provide function-testing guidance and how often should function testing be done?
Function testing should occur at every setup, during operator and shift changes, and after maintenance. Access checklists and guidance through our Reference Guides.
Contact Us
Assistance and Support When You Need It.
Our team of experts is ready to provide the personalized support you need. Your safety is our priority—talk directly to a safety professional for quick and accurate assistance.
Open Monday – Friday, 8:00am – 5:00pm CST. Same day email support responses.