Large Steel Lathe Chuck Shields
$2,382.14 – $5,135.45
Product Description
The large steel lathe chuck shields are made of fabricated 18-gauge steel with reinforced sides. They can be used on lathes that have chucks up to 47-inches in diameter. They are double hinged for access to the chuck, workpiece, and tool. The front hinged portion can be swung up for workpiece changes, and the entire shield can be hinged back for changing chucks.
Each shield is furnished with a mounting rod, plate and support bar for mounting the shield to the face of the headstock. The rear mounting bracket hinges the entire shield, and the side mounting bracket supports the shield in its normal operating position.
Contact Customer Service
Reach a Real Person @: 1-800-922-7533
Open Monday – Friday, 8:00am – 5:00pm CST
Same Day Support Response
Related Products
-
$1,578.41 – $1,886.66Select options This product has multiple variants. The options may be chosen on the product page -
$227.57 – $293.74Select options This product has multiple variants. The options may be chosen on the product page -
$3,699.07 – $5,713.23Select options This product has multiple variants. The options may be chosen on the product page -
$506.77 – $773.07Select options This product has multiple variants. The options may be chosen on the product page
Rockford Products
PROTECTOR™ Series Shields (RSS)
Hydraulic Press Brake Controls (RHPS)
Mechanical Press Brake Controls (PRS, RT)
Hydraulic Press Controls (RHPC)
Part Revolution Clutch Press Controls (PRC)
Full Revolution Clutch Press Controls (FPA, FPG, FBH)
Milling Machine Draw Bar Cover (DBC001)
Slide and Swing-Aside Shields
200-lb Pull Air Cylinder (RCL003)
100-lb Pull Air Cylinder (RCL002)
50-lb Pull Air Cylinder (RCL001)
On/Off Magnetic Base Only With M12 Tap (FKT285)
Mounting Plate For Magnetic-Base Shields
Flat Mounting Bracket for 18-inch x 6-inch Shield
Dual-Solenoid Air Valves for Full-Revolution Presses (RCD140)
Manual Pilot Air Lockout Valves
1/2″ Strainer, 100# Mesh, Class 300, FNPT
¾” Strainer, 100# Mesh, Class 300, FNPT
1″ Strainer, 100# Mesh, Class 300, FNPT, Ductile Iron Body
1.5″ Strainer, 100# Mesh, Class 300, FNPT
2″ Strainer, 100# Mesh, Class 300, FNPT
Jomar, T-100NE, 100-708, Valve, 2″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
Siemens, 1-1/2″ NPT Single Safety Shut-off Valve
Siemens, 1″ VGG Safety Shut-off Valve, Max Operating Pressure, 20 PSI, UL Listed, FM Approved and CSA Certified
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed
Siemens, No Switches, Safety Actuator, 120VAC, NEMA 12
Siemens, Gas Actuator Sealing Kit for SKP Actuators, NEMA 3, NEMA 3R, and NEMA 4 protection
Siemens, SKP Heating Element, Automatic Set Thermostat (on at 25°F, off at 50°F)
Siemens, Proof Of Closure & Auxiliary Switches Safety Actuator, 120VAC, NEMA 12
Siemens, Proof Of Closure Only Switch Safety Actuator, 120VAC, NEMA 12
Jomar, T-100NE, 100-704, Manual Isolation Valve, .75″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
1/2″ NPT Needle Valve, 2 INWC full open pressure drop at 150 SCFH Natural Gas
Siemens, 2″ NPT Single Safety Shut-off Valve
Jomar, Lift-N-Lock, 210-996C, 1″ – 1-1/4″ Ball Valve Locking Kit
Jomar, Lift-N-Lock, 210-994C, 1/4″ – ½” Ball Valve Locking Kit, Closed Position
Jomar, T-100NE, 100-707, Valve, 1.5″, Ball, Manual, FNPT, Bronze Body, (UL, CSA, FM Approved)
ASCO, 1/2″ NPT Solenoid Valve, Normally Closed, Shut-off, 0-50 PSI, 120/110VAC, 60/50 Hz (UL, FM, CSA)