Category: Press Brakes
Showing 73–96 of 98 results
-
On/Off Magnetic Base Only With M12 Tap (FKT285)
$671.48The On/Off Magnetic Base Only With M12 Tap (FKT285) is designed to easily control the machine is a safe and non-hazardous manner for the worker.
-
Operator Safety Signs (Cutting/Turning KSC048-KSC048S-KSC048F and Forming/Fabricating KSC000-KSC000S)
$33.36Cutting/Turning and Forming/Fabricating Specific Operator Safety Signs are available in English, Spanish and French. Ex. “Never place your hands in this machine.”
-
Palm Button Assemblies – Black Palm Button (CTC726)
$601.88This standard heavy-duty, single plunger run palm button provides one normally open and one normally closed contact arrangement. This 2 1/4″ button is mushroom-shaped. The palm button face plate has a solid neoprene gasket which provides an oil-tight seal upon installation. When applying two-hand control as a safeguard to any machine, fixture, device, etc., the…
-
Palm Button Mounting Boxes
$68.17 – $133.43Part No. CTK-004 Single-hub mounting box is used when wires terminate at this box. Part No. CTK-003 Double-hub mounting boxes are used when wires are required to go through the box and on to another mounting box. Part No. CTK-038 Deep single-hub mounting box is used when wires terminate at this box. Part No. CTK-039…
-
Part Positioners
$59.47Stock positioner with screwdriver point with 90-degree bend to remove parts from die. Total Length: 14″ Weight: 2 1/2 oz.
-
Pliers and Tongs for Presses and Press Brakes
$59.47 – $211.74Pliers and tongs are used to keep hands out of the point of operation while feeding or removing parts from the machine. Pliers and tongs, like all hand-feeding tools, are not considered to be guards or devices by themselves. But these hand tools offer additional protection. Most of the tools are constructed of soft alloy…
-
Point-Of-Operation Gauge (KSC100)
$37.71The point-of-operation gauge is designed to be used as a quick reference tool to check for what OSHA regulations and ANSI standards refer to as safe-opening. It is a valuable tool to use during the design, installation, and inspection of guards to make sure the openings do not exceed 1/4″ (6 mm) for OSHA/ANSI and…
-
Danger Signs for Press Brakes (KSC060-KSC060S)
$33.36Press Brake Danger, Visual Safety Signs (KSC060-KSC060S) are designed for visual danger awareness. Sign are available in English and Spanish.
-
Red Emergency-Stop Palm Button (CTC736)
$858.58This heavy-duty, single plunger red emergency-stop palm button provides 1 NO and 1 NC contact arrangement. This 2 1/4″ button has a mushroom-shaped plunger with a spring latch that keeps the button latched down when pushed to meet NFPA 79. A release is incorporated. It also has provisions for attaching a padlock to the latch….
-
-
-
Replacement Arm For Universal Ball-and-Socket Safety Shield
$432.20 – $452.50Universal Ball-and-Socket Safety Shield Replacement Arms are designed to replace existing and worn Ball-and-Socket Arms in order to maximize safety levels and efficiency. Product Manual Download the Product Manual PDF
-
Replacement Arm, Direct-Mount Flexible Spring-Steel
$147.93 – $158.08The Direct-Mount Flexible Spring-Steel Replacement Arms are designed to replace existing worn-down arms in order to maximize safety levels. Product Manual Download the Product Manual PDF
-
Replacement Arm, Magnetic-Mount Flexible Spring-Steel
$186.03 – $208.85The Magnetic-Mount Flexible Spring-Steel Replacement are designed to replace the existing arms, when the arms become worn, in efforts to maximize safety levels and efficiency. Magnet have 100-lb pull. Product Manual Download the Product Manual PDF
-
Replacement Arms for Flexible Spring Steel On/Off Magnet-Base Shields
$176.94 – $208.85The Flexible Spring-Steel Replacement Arms are designed to replace the existing arms for on/off magnet-base shields, when the arms become worn, in efforts to maximize safety levels and efficiency. Product Manual Download the Product Manual PDF
-
Warning Label for Rotating Gears and Pulley (KST181)
$18.49Rotating Gears and Pulley Danger Labels (KST181) are designed to raise awareness of the dangers with rotating gears and pulleys. Ex. “You are exposed to moving machine parts that can crush, dismember, and cause death.”
-
-
Standard Palm Button Assemblies
$1,591.00 – $2,049.29Two-Hand Control, Standard Palm Button Assemblies To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with ring guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be…
-
Standard-Voltage Articulated Palm Button (CTC746)
$1,428.55The heavy-duty, standard-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
-
Steel Bases for Die Safety Blocks
$310.37 – $369.83This steel safety block base can be added to U-shaped, octagonal-shaped, and X-shaped safety blocks. The base adds stability to help prevent the die block from tipping over. Available in 1/2″-thick steel. To learn more about die blocks, we invite you to read our blog post “Demystifying Die Safety Blocks.” Aluminum safety block bases are…
-
Super-Grabber Vacuum Lifter (KMK055)
$71.06The four-finger grip and larger cup provide extra lifting capacity. Its larger diameter makes this lifter ideal for greater loads. Breaks oil adhesions easily. It also has specially designed release tabs. Lifts about 12 pounds. 4 3/4″ diameter cup.
-
Universal Palm Button Ring Guard (CTK006)
$75.42This palm button ring guard is the way to protect new and existing run palm buttons from accidental operation. The ring guard is made from high-impact PVC plastic and can be used with most palm button brands. Four 1 1/4″ screws are furnished with each ring guard.
-
-
Yellow Return Palm Button (CTC740)
$584.47Emergency Stop, Yellow Return Palm Button (CTC740) This heavy-duty, single plunger yellow return palm button provides 1 NO and 1 NC contact arrangement. This 2 1/4″ button has a mushroom-shaped plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. This button is used to return the…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
