Category: Interlocks
Showing all 14 results
-
Emergency Stop Safety Relay – Single Channel (RFT148)
$622.32An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Die Safety Block Electrical Interlock
$457.51 – $945.34According to ANSI B11.19-2003, safety blocks “shall be interlocked with the machine to prevent actuation of hazardous motion of the machine.” The following interlock systems will satisfy this requirement. The electrical interlock system for die safety blocks must be interfaced into the control system so that when the plug is pulled, the power to the…
-
Flexible In-Line Actuator (CMC560)
$159.53Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Flexible In-Line Actuator—Flanged (CMC559A)
$205.68Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
In-Line Actuator (CMC558A)
$121.30A linear actuator is designed for those applications where the mounting envelope dictates that the motor is to be in line with the ball screw. Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Magnetic Safety Switches
$771.30 – $1,365.93Magnetic safety switches are used on perimeter guarding doors and slide or swing-open shields for drills, mills and other machines. These reed-type magnetic safety switches utilize magnetic actuation. They offer non-contact reliability along with tolerance for misalignment. These magnetic safety switches are totally submersible, which makes them ideal for environments where hygiene is important. Each…
-
Metal Solenoid Locking Safety Interlock Switches
$1,307.91 – $1,826.07120V AC—1 NC & 1 NO Switching Contacts and 1 NC & 1 NO Solenoid Monitor Contacts*
24V DC—2 NC Switching Contacts and 1 NC & 1 NO Solenoid Monitor Contacts**With actuator engaged and locked
-
Non-locking Safety Switches—Flat-Pack Style
$251.83 – $319.072 NC & 1 NO Safety Contacts*
*With actuator engaged
-
Non-Locking Safety Switches—Metal Housing
$585.40 – $677.69These tamper-resistant safety switches can be used to interlock hinged, sliding, or lift-off guards. Closure of the guard or latch causes the actuator to enter the switch and release the dual anti-tamper locking cams. The actuator allows the main center cam to rotate and make the switch contacts. When opening the guard or latch, the…
-
Right Angle Rigid In-Line Actuator (CMC547A)
$68.56In-line safety actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Rigid In-Line Actuator (CMC549A)
$54.06In-lin safety actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Slim Line Non-Locking Safety Switches
$286.10 – $379.71Tamper-resistant safety switches can be used to interlock hinged, sliding, or lift-off guards. Closure of the guard or latch causes the actuator to enter the switch and release the dual anti-tamper locking cams. The actuator allows the main center cam to rotate and make the switch contacts. When opening the guard or latch, the actuator…
-
Solenoid Locking Safety Interlock Switches
$1,154.98 – $1,408.12Kit includes switch, actuator, and conduit adapter. Locking switches are designed to prevent accidental or deliberate access while the machine is in motion. The mechanical locking feature is ideal for machines that have to finish a sequence, a program, or coast to a stop before the interlocked guard can be opened. The switches allow the…
-
Straight Rigid In-Line Actuator (CMC546A)
$68.56Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
