Part-Revolution-Clutch Press Control Systems Archives

Showing 25–42 of 42 results

Light Curtain Interface for Point of Operation (EZ) Light Curtains
$834.88 – $3,230.91
The EZ-Screen light curtain interfaces are available in several variations. They are available with the components furnished loose, in a plain door enclosure, or in an enclosure with the operators on the door. Depending on the requirements, component options include terminals, fuses, a safety monitoring relay, force-guided relays, a light curtain off/on selector switch, a…

Select options
Light Curtain Mirrors For Light Curtains
$633.15 – $2,243.95
Light curtain mirrors can be used with the light curtain to protect more than one side of the point of operation or work envelope. The mirrors for light curtains can help protect two, three, and even four sides of the point of operation or perimeter area. They are usually mounted on a 45-degree angle at…

Select options
Light Curtain Off-On With Reset Remote Operator Station (LLD1238)
$519.86
The light curtain off-on with reset remote operator station is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes an off/on keyed selector switch and a light curtain reset button in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.

Add to cart
Light Curtain Reset Remote Operator Station (LLD1237)
$338.30
The light curtain reset remote operator station is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes a light curtain reset button in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.

Add to cart
Light Curtain Test Rods for Light Curtain Systems
$57.43
Light curtain test rods for light curtain systems must be used to test the light curtain after each setup or after any maintenance work is performed. A test rod is included with each shipment of a light curtain system.

Select options
Light-Push Palm Button Assemblies
$2,340.18 – $2,621.04
Download the Product Manual PDF
Select options
Low-Voltage Articulated Palm Button (CTC751)
$1,610.80
This heavy-duty, low-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…

Add to cart
Manual Air Lockout Valve
$777.47
Download the Product Manual PDF
Select options
Manual Pilot Air Lockout Valves
$2,549.66 – $4,334.27
Download the Product Manual PDF
Select options
Non-Adjustable Floor Stand for Control Bar or Palm Button Assembly (KCL000)
$1,495.97
This 37″ nonadjustable heavy-duty floor stand includes a top plate and a 4″ x 4″ column. The base has four holes for permanent attachment to the floor; bolts are not furnished.

Add to cart
Palm Button Assemblies – Black Palm Button (CTC726)
$644.01
This standard heavy-duty, single plunger run palm button provides one normally open and one normally closed contact arrangement. This 2 1/4″ button is mushroom-shaped. The palm button face plate has a solid neoprene gasket which provides an oil-tight seal upon installation. When applying two-hand control as a safeguard to any machine, fixture, device, etc., the…

Add to cart
Palm Button Mounting Boxes
$72.94 – $142.77
Part No. CTK-004 Single-hub mounting box is used when wires terminate at this box. Part No. CTK-003 Double-hub mounting boxes are used when wires are required to go through the box and on to another mounting box. Part No. CTK-038 Deep single-hub mounting box is used when wires terminate at this box. Part No. CTK-039…

Select options
Red Emergency-Stop Palm Button (CTC736)
$918.68
This heavy-duty, single plunger red emergency-stop palm button provides 1 NO and 1 NC contact arrangement. This 2 1/4″ button has a mushroom-shaped plunger with a spring latch that keeps the button latched down when pushed to meet NFPA 79. A release is incorporated. It also has provisions for attaching a padlock to the latch….

Add to cart
Slide-Operated Air Lockout Valves
$201.74 – $257.61
Download the Product Manual PDF
Select options
Spring-Loaded, Self-Ejecting, Safety Turnover Bars
$336.74 – $533.84
Spring-loaded turnover bars are most frequently used with mechanical power presses. Turnover bars can also be used on four-slides or any other machine where the bar might be sent into the air if it is inadvertently left in the bar ring hole and the machine is turned on. Each spring-loaded turnover bar is self-ejecting so…

Select options
Standard Palm Button Assemblies
$1,702.37 – $2,192.74
Two-Hand Control, Standard Palm Button Assemblies To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with ring guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be…

Select options
Standard-Voltage Articulated Palm Button (CTC746)
$1,528.55
The heavy-duty, standard-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…

Add to cart
Yellow Top-Stop Palm Button (CTC727)
$625.38
This heavy-duty, single plunger yellow top-stop palm button provides 1 NO and 1 NC contact arrangement. This 2 1/4″ button has a mushroom-shaped plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. The force required to operate this button is 4.3 lb.

Add to cart