Category: Press Brake Control Systems
Showing 25–44 of 44 results
-
Light Curtain Interface for Point of Operation (EZ) Light Curtains
$834.88 – $3,230.91The EZ-Screen light curtain interfaces are available in several variations. They are available with the components furnished loose, in a plain door enclosure, or in an enclosure with the operators on the door. Depending on the requirements, component options include terminals, fuses, a safety monitoring relay, force-guided relays, a light curtain off/on selector switch, a…
-
Light Curtain Mirrors For Light Curtains
$633.15 – $2,243.95Light curtain mirrors can be used with the light curtain to protect more than one side of the point of operation or work envelope. The mirrors for light curtains can help protect two, three, and even four sides of the point of operation or perimeter area. They are usually mounted on a 45-degree angle at…
-
Light Curtain Off-On With Reset Remote Operator Station (LLD1238)
$519.86The light curtain off-on with reset remote operator station is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes an off/on keyed selector switch and a light curtain reset button in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.
-
Light Curtain Reset Remote Operator Station (LLD1237)
$338.30The light curtain reset remote operator station is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes a light curtain reset button in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.
-
Light Curtain Test Rods for Light Curtain Systems
$57.43Light curtain test rods for light curtain systems must be used to test the light curtain after each setup or after any maintenance work is performed. A test rod is included with each shipment of a light curtain system.
-
-
Low-Voltage Articulated Palm Button (CTC751)
$1,610.80This heavy-duty, low-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
-
-
Non-Adjustable Floor Stand for Control Bar or Palm Button Assembly (KCL000)
$1,495.97This 37″ nonadjustable heavy-duty floor stand includes a top plate and a 4″ x 4″ column. The base has four holes for permanent attachment to the floor; bolts are not furnished.
-
Palm Button Assemblies – Black Palm Button (CTC726)
$644.01This standard heavy-duty, single plunger run palm button provides one normally open and one normally closed contact arrangement. This 2 1/4″ button is mushroom-shaped. The palm button face plate has a solid neoprene gasket which provides an oil-tight seal upon installation. When applying two-hand control as a safeguard to any machine, fixture, device, etc., the…
-
Palm Button Mounting Boxes
$72.94 – $142.77Part No. CTK-004 Single-hub mounting box is used when wires terminate at this box. Part No. CTK-003 Double-hub mounting boxes are used when wires are required to go through the box and on to another mounting box. Part No. CTK-038 Deep single-hub mounting box is used when wires terminate at this box. Part No. CTK-039…
-
Point-Of-Operation Gauge (KSC100)
$40.35The point-of-operation gauge is designed to be used as a quick reference tool to check for what OSHA regulations and ANSI standards refer to as safe-opening. It is a valuable tool to use during the design, installation, and inspection of guards to make sure the openings do not exceed 1/4″ (6 mm) for OSHA/ANSI and…
-
Danger Signs for Press Brakes (KSC060-KSC060S)
$35.70Press Brake Danger, Visual Safety Signs (KSC060-KSC060S) are designed for visual danger awareness. Sign are available in English and Spanish.
-
Red Emergency-Stop Palm Button (CTC736)
$918.68This heavy-duty, single plunger red emergency-stop palm button provides 1 NO and 1 NC contact arrangement. This 2 1/4″ button has a mushroom-shaped plunger with a spring latch that keeps the button latched down when pushed to meet NFPA 79. A release is incorporated. It also has provisions for attaching a padlock to the latch….
-
-
Standard Palm Button Assemblies
$1,702.37 – $2,192.74Two-Hand Control, Standard Palm Button Assemblies To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with ring guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be…
-
Standard-Voltage Articulated Palm Button (CTC746)
$1,528.55The heavy-duty, standard-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
-
-
Yellow Return Palm Button (CTC740)
$625.38Emergency Stop, Yellow Return Palm Button (CTC740) This heavy-duty, single plunger yellow return palm button provides 1 NO and 1 NC contact arrangement. This 2 1/4″ button has a mushroom-shaped plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. This button is used to return the…
-
Zone Monitor for Safety Mats
$2,178.77 – $3,196.76For applications where multiple safety mats are needed, a zone monitor can be used. It acts as a control box, while eliminating the need for a junction box for multiple safety mat installations. Additionally, it has a diagnostic feature to determine which mat or mats have been tripped. The zone monitor is available in two…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2024. All Rights Reserved By Rockford Systems LLC
