Category: Safety Shields
Showing 25–48 of 85 results
-
Emergency Stop Safety Relay – Single Channel (RFT148)
$732.47An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Electrical Plug Lockout Container (KYM088)
$100.87This lockout container can lock out plugs up to 3″ wide and 5 1/2″ long with a maximum cord diameter of 1 1/4″. The lockout consists of a round container and two cover plates made of a durable and chemically resistant thermoplastic. The cover plates, when used singularly or combined, are locked to produce a…
-
Electrical Plug-out (KYM983)
$175.35Two Step Close, Slide Assembly, Electrical Plug-out This lockout container accepts lockout plugs up to 2 3/4″ wide and 4 3/4″ long with a maximum cord diameter of 2 3/4″. It is constructed of high-impact, yellow UV-stabilized polymer. It has an easy to use two-step close and slide assembly. It allows the use of four…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,215.09An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Enclosed Transformers
$578.84 – $712.29Direct Frame-Mounting Station, Enclosed Transformers These transformers comply with OSHA regulations and ANSI standards and are available for use when the motor start/stop station is remotely located from the starter enclosure, and voltage to these buttons must be 115 V or less. These transformers mount directly to the frame of the machine. If the existing…
-
Flat Mounting Bracket for 18-inch x 6-inch Shield
$62.07This mounting bracket is designed to stabilize the 18-inch x 6-inch bench grinder shield.
-
Free-Standing Safety Shield Assembly
$2,391.39 – $3,198.34These free-standing shield assemblies can be used to protect the area between machines, the backside of machines, along aisles, etc. These free-standing adjustable shield assemblies are available in a wide range of sizes. They are constructed of 3/16-inch-thick polycarbonate material surrounded by aluminum framing. The shield can easily be adjusted up or down on the…
-
Magnetic Safety Switches
$907.82 – $1,607.70Magnetic safety switches are used on perimeter guarding doors and slide or swing-open shields for drills, mills and other machines. These reed-type magnetic safety switches utilize magnetic actuation. They offer non-contact reliability along with tolerance for misalignment. These magnetic safety switches are totally submersible, which makes them ideal for environments where hygiene is important. Each…
-
Metal Conduit Adapter—M20 to 1/2″ (SIQMM20)
$38.80Metal Conduit Adapter—M20 to 1/2″ (SIQMM20) – Rockford Systems, LLC produces metal conduit adapters in various sizes and are for help with machinery needs.
-
-
Mounting Plate For Magnetic-Base Shields
$62.07These are designed to be used in the junction between the shield and the machinery being utilized.
-
Non-locking Safety Switches—Flat-Pack Style
$296.40 – $375.552 NC & 1 NO Safety Contacts*
*With actuator engaged
-
Non-Locking Safety Switches—Metal Housing
$689.02 – $797.64These tamper-resistant safety switches can be used to interlock hinged, sliding, or lift-off guards. Closure of the guard or latch causes the actuator to enter the switch and release the dual anti-tamper locking cams. The actuator allows the main center cam to rotate and make the switch contacts. When opening the guard or latch, the…
-
On/Off Magnetic-Base Shields
$761.96 – $976.11These versatile On-Off magnet-base shields can be used on lathes, drills, mills, grinders, or any equipment that has a flat, ferrous mounting surface. The heavy-duty magnetic base is 2 3/4-inch square with a V-groove and measures 3-inches high. The 200-lb holding force keeps the shield in place when the magnet is on. If an adequate…
-
On/Off Magnetic Base Only With M12 Tap (FKT285)
$718.48The On/Off Magnetic Base Only With M12 Tap (FKT285) is designed to easily control the machine is a safe and non-hazardous manner for the worker.
-
Plastic Conduit Adapter—M20 to 1/2″ (SIQSM20)
$32.98Spare Plastic Conduit Adapter—M20 to 1/2″ (SIQSM20)
-
Milling Machine Chip Shields
$876.78 – $941.96Front and rear shields are available. NOTE: Milling Machine Chip Shields KYL019 and KYL059 are *Marked for Discontinuation* until inventory is depleted. Replacement transparent shields and mounting arms will be supported and supplied through January 1, 2024 or until inventory is depleted. Replacement Milling Chip Shields for KYL Series are the Protector Series Shields: Please…
-
Milling Machine Control
$4,470.82Themilling machine control is designed for vertical milling machines that have a table motor. Each milling machine control is housed in a NEMA 12 enclosure that includes a disconnect switch, reversing magnetic main drive motor starter, a control relay for the table motor, and a 100 VA transformer that is generically numbered and wired to…
-
Replacement Safety Shields for Mills
$487.28The Mill Replacement Shields are designed to replace existing shields that show signs of wear, to optimize safety. Product Manual Download the Product Manual PDF
-
Rear Milling Machine Shield Assembly
$1,517.70 – $1,814.10Rear milling machine shield assemblies can be used to protect personnel from swarf and chips at the rear of the table on both sides of the machine column. They can be used on milling machines or other equipment that require these types of shields. The two 3/16-inch-thick polycarbonate panels are mounted to the frame of…
-
Remote Station With Motor On Push Button and Emergency-Stop Palm Button (VOS2000)
$583.50For Use With Nonreversing Motor Starters
-
Remote Station With Self-Latching Emergency Stop Button (HOS4000)
$496.58This emergency stop button measures 4 1/2 inches by 3 1/2 inches by 3 inches. It is housed in a NEMA 12 metal enclosure. The emergency stop is self-latching; to reset the red button, turn it to the right.
-
-
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2024. All Rights Reserved By Rockford Systems LLC
