Category: Two-Hand Devices
Showing all 13 results
-
-
Adjustable Floor Stand for Control Bar or Palm Button Assembly (KCL017)
$1,139.94The adjustable column (28″ to 47″) on this floor stand can easily be moved up and down for operator comfort. A hand tool is required to make adjustments. The base has four holes for permanent attachment to the floor; bolts are not furnished. Custom heights are available. Please consult the factory.
-
Articulated Palm Button Assemblies
$2,356.75 – $3,096.41To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be used as a point-of-operation safeguard. These palm…
-
Chrome, Light-Push Button (CTC737)
$572.87This heavy-duty, light-push, single plunger run/inch palm button provides 1 NO and 1 NC contact arrangement. This 2 1/2″ button is constructed of zinc cast and has a flat plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. This palm button can be used instead of…
-
Function-Testing Checklist for Two-Hand Control and Two-Hand Trip
$17.04Before operating a machine with two-hand control or two-hand trip, function tests should be done to make sure that the safeguard is adjusted and working properly. These tests should be done at every setup, operator, and shift change, as well as every time after maintenance is performed. This two-hand control and two-hand trip function-testing checklist…
-
-
Low-Voltage Articulated Palm Button (CTC751)
$1,505.42This heavy-duty, low-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
-
Non-Adjustable Floor Stand for Control Bar or Palm Button Assembly (KCL000)
$1,398.10This 37″ nonadjustable heavy-duty floor stand includes a top plate and a 4″ x 4″ column. The base has four holes for permanent attachment to the floor; bolts are not furnished.
-
Palm Button Assemblies – Black Palm Button (CTC726)
$601.88This standard heavy-duty, single plunger run palm button provides one normally open and one normally closed contact arrangement. This 2 1/4″ button is mushroom-shaped. The palm button face plate has a solid neoprene gasket which provides an oil-tight seal upon installation. When applying two-hand control as a safeguard to any machine, fixture, device, etc., the…
-
Palm Button Mounting Boxes
$68.17 – $133.43Part No. CTK-004 Single-hub mounting box is used when wires terminate at this box. Part No. CTK-003 Double-hub mounting boxes are used when wires are required to go through the box and on to another mounting box. Part No. CTK-038 Deep single-hub mounting box is used when wires terminate at this box. Part No. CTK-039…
-
Safety Distance Guide Slide Chart (LLL050)
$25.38This slide chart calculates the safety distance for mounting two-hand trip, two-hand control, and presence-sensing devices on machinery.
-
Standard Palm Button Assemblies
$1,591.00 – $2,049.29Two-Hand Control, Standard Palm Button Assemblies To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with ring guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be…
-
Standard-Voltage Articulated Palm Button (CTC746)
$1,428.55The heavy-duty, standard-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
