Category: Products
Showing 73–96 of 232 results
-
Electrical Plug Lockout Container (KYM088)
$100.87This lockout container can lock out plugs up to 3″ wide and 5 1/2″ long with a maximum cord diameter of 1 1/4″. The lockout consists of a round container and two cover plates made of a durable and chemically resistant thermoplastic. The cover plates, when used singularly or combined, are locked to produce a…
-
Electrical Plug-out (KYM983)
$175.35Two Step Close, Slide Assembly, Electrical Plug-out This lockout container accepts lockout plugs up to 2 3/4″ wide and 4 3/4″ long with a maximum cord diameter of 2 3/4″. It is constructed of high-impact, yellow UV-stabilized polymer. It has an easy to use two-step close and slide assembly. It allows the use of four…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,215.09An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Die Safety Block Electrical Interlock
$538.49 – $1,112.66According to ANSI B11.19-2003, safety blocks “shall be interlocked with the machine to prevent actuation of hazardous motion of the machine.” The following interlock systems will satisfy this requirement. The electrical interlock system for die safety blocks must be interfaced into the control system so that when the plug is pulled, the power to the…
-
Enclosed Transformers
$578.84 – $712.29Direct Frame-Mounting Station, Enclosed Transformers These transformers comply with OSHA regulations and ANSI standards and are available for use when the motor start/stop station is remotely located from the starter enclosure, and voltage to these buttons must be 115 V or less. These transformers mount directly to the frame of the machine. If the existing…
-
Energy Source ID Tags
$4.82 – $13.19Energy Source Attachment ID Tags for Hazard Awareness These tags can be used to identify the different hazardous energy sources associated with machinery throughout a plant or factory. They can be permanently or temporarily attached at the energy source. These tags can be used in conjunction with a company’s energy control program. All tags are…
-
Ergonomic Safeball Ball and Socket Mount (FKT301)
$325.89THIS PRODUCT HAS A 10-DAY LEAD TIME The FKT301 is designed to be used with the ergonomic Safeball palm button (CTC773). It is a flexible ball joint mount that offers tilt and rotation for increased ergonomic support.
-
-
EX-AL™ Hinges and Ball Lock Pin
$31.43 – $440.71Hinges are used to swing guard panels and segments to the right or left. They are attached to the aluminum extrusion anywhere along the T-slot with button-head or socket-head cap screws and T-nuts (furnished). Standard aluminum hinges and lift-off hinges are available. This specially designed hinge assembly is used on the light curtain swing-away mounting…
-
EX-AL™ Joining-and-Locking-Plates
$10.09 – $66.73A variety of brackets, plates, clamps, bolts, bearings, rollers, etc., are available for attaching guards to machines and for guard assemblies. Joining plates are used to connect extruded panels without additional machining. Joining strips and plates are used to connect extrusions to one another or to machines. The standard sizes of most of these mounting…
-
EX-AL™ Linear Bearings and Channel Guide
$52.75 – $139.67Linear bearings and channel guides are used in applications such as sliding panels or gates. These cost-effective alternatives to traditional bearings can be used in both low and high acceleration/deceleration applications. Linear bearings mate and glide on T-Slot aluminum extrusion profiles and the bearing pads are self-lubricating for smooth linear motion.
-
EX-AL™ Mounting Brackets
$27.16 – $103.96Mounting brackets are used for attaching extrusion-constructed guards to one another or to machines. The standard sizes of most of these mounting brackets are .188 thick 6063 aluminum alloy, clear anodized with .257 diameter holes on 1.0″ center lines.
-
EX-AL™ Panel Retainer (FKT560)
$32.98The panel retainer holds mesh in the extruded-aluminum framework of the guard. This retainer prevents panel push out and is the strongest way to hold panels in place.
-
EX-AL™ Perimeter Guarding Steel Hairpins
$0.00 – $23.28*PLEASE NOTE* The Hairpin Clip Assembly FKT753 is ordered separately. Steel hairpins are used in the adjustable area of a perimeter guarding panel and are constructed of black-oxidized steel. These hairpins are 1/4-inch round rods on 3/4-inch centers (1-inch wide from outside to outside) which create a 1/2-inch opening between hairpins). Hairpins provide adjustability of…
-
EX-AL™ T-Handle Hex Wrenches
$41.89 – $43.45The T-handle hex wrench is an ideal way to tighten and loosen button-head cap screws and socket-head cap screws. The handle has a cushion grip and the long arm (approx. 7 1/8″ arm / 9″ total w/handle) provides access to hard to reach areas. The end of the hex wrench is ball-shaped which allows for…
-
EX-AL™ T-Nuts, Fasteners and End Caps
$0.59 – $16.29EX-AL™ Various T-Nuts, Fasteners and End Caps T-nuts allow joining plates, panels, hinges, and other accessories to be bolted into the T-slot of any of the extrusions. They are made of hardened steel and are coated with corrosion-resistant black oxide. Standard T-nuts slide into the T-slot from the end. The drop-in style allows the T-nut…
-
-
Flat Mounting Bracket for 18-inch x 6-inch Shield
$62.07This mounting bracket is designed to stabilize the 18-inch x 6-inch bench grinder shield.
-
Flexible In-Line Actuator (CMC560)
$187.76Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Flexible In-Line Actuator—Flanged (CMC559A)
$242.09Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Flywheel Rotation Sign
$19.78Flywheel Rotation Sign for Visual Danger Attention The Flywheel Rotation Sign for Visual Danger Attention are danger signs for flywheel rotation. Includes arrow pointing to flywheel danger.
-
Foot Switch Yellow (CTD011)
$1,319.05Keeps operators hands free from machinery by using die-cast foot switches, designed for use on machinery with proper “Point of Operation” and “Pinch Point” guarding devices in place. This foot switch is protected from unintentional operation. A die-cast cover protects the top and both sides, and the front is protected by a hinged flap. The…
-
Foot Switch Signs (KSC055-KSC055S-KSC055F)
$35.70The Foot Switch Signs and Labels are designed for visual awareness and are available in English, Spanish and French.
-
Free-Standing Safety Shield Assembly
$2,391.39 – $3,198.34These free-standing shield assemblies can be used to protect the area between machines, the backside of machines, along aisles, etc. These free-standing adjustable shield assemblies are available in a wide range of sizes. They are constructed of 3/16-inch-thick polycarbonate material surrounded by aluminum framing. The shield can easily be adjusted up or down on the…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2024. All Rights Reserved By Rockford Systems LLC
