Category: Safeguarding Devices
Showing 25–48 of 106 results
-
Warning Labels for Die Safety Blocks (KST323-KST323S)
$20.57The Die Safety Block Warning Labels (KST323-KST323S) These visual safety tools are designed as visual safety tools to raise awareness of the dangers of die safety blocks nearby. These signs are available in English and Spanish.
-
DIN-Rail Control Module (RFT139)
$1,173.19DIN-Rail Mounted Control Multi-Mode Module (RFT139) If the safety mat control box (Part No. RKR-162) is not required, a DIN-rail mounted control module is available. Each control module has 4 NO safety contacts and 1 NC auxiliary contact. The control module allows operation in either automatic or manual reset modes.
-
Drop-Probe Rod for Detect-a-Finger® (FCT030)
$7.77The DAF100 Adjustable Stroke Detect-A-Finger® drop-probe device for riveters and welders reduces accidents at the point of operation where the operator’s fingers can enter. This device is an electric-air system that consists of two main components: the drop-probe assembly and the control box. The standard unit can provide a stroke of up to 4-inches and…
-
Dual-Solenoid Air Valves for Mechanical Power Presses and Press Brakes
$2,397.57 – $9,085.98These monitored dual solenoid air valves are ideal to use on mechanical power presses and other potentially hazardous machinery that utilize a pneumatically controlled clutch and brake mechanism. Each valve has two valve elements independently controlled by two solenoid pilots. The two valve elements share common inlet, outlet, and exhaust ports. When the pilot valves…
-
-
Emergency Stop Safety Relay – Single Channel (RFT148)
$732.47An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Single-Channel Emergency Stop Safety Relay monitors one single-channel normally closed Emergency Stop switch circuit for a contact failure or wiring fault. When using a single channel emergency stop safety relay, the wiring is monitored and compared. If…
-
Emergency Stop Safety Relay – Dual Channel (RFT149)
$1,215.09An Emergency Stop Safety Module is used to increase the control reliability of an emergency stop circuit. The Dual-Channel Emergency Stop Safety Relay monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking. It is designed to connect safety devices, such as interlock switches, to the…
-
Energy Source ID Tags
$4.82 – $13.19Energy Source Attachment ID Tags for Hazard Awareness These tags can be used to identify the different hazardous energy sources associated with machinery throughout a plant or factory. They can be permanently or temporarily attached at the energy source. These tags can be used in conjunction with a company’s energy control program. All tags are…
-
Ergonomic Safeball Ball and Socket Mount (FKT301)
$325.89THIS PRODUCT HAS A 10-DAY LEAD TIME The FKT301 is designed to be used with the ergonomic Safeball palm button (CTC773). It is a flexible ball joint mount that offers tilt and rotation for increased ergonomic support.
-
EX-AL™ Hinges and Ball Lock Pin
$31.43 – $440.71Hinges are used to swing guard panels and segments to the right or left. They are attached to the aluminum extrusion anywhere along the T-slot with button-head or socket-head cap screws and T-nuts (furnished). Standard aluminum hinges and lift-off hinges are available. This specially designed hinge assembly is used on the light curtain swing-away mounting…
-
EX-AL™ Joining-and-Locking-Plates
$10.09 – $66.73A variety of brackets, plates, clamps, bolts, bearings, rollers, etc., are available for attaching guards to machines and for guard assemblies. Joining plates are used to connect extruded panels without additional machining. Joining strips and plates are used to connect extrusions to one another or to machines. The standard sizes of most of these mounting…
-
EX-AL™ Linear Bearings and Channel Guide
$52.75 – $139.67Linear bearings and channel guides are used in applications such as sliding panels or gates. These cost-effective alternatives to traditional bearings can be used in both low and high acceleration/deceleration applications. Linear bearings mate and glide on T-Slot aluminum extrusion profiles and the bearing pads are self-lubricating for smooth linear motion.
-
EX-AL™ Mounting Brackets
$27.16 – $103.96Mounting brackets are used for attaching extrusion-constructed guards to one another or to machines. The standard sizes of most of these mounting brackets are .188 thick 6063 aluminum alloy, clear anodized with .257 diameter holes on 1.0″ center lines.
-
EX-AL™ T-Handle Hex Wrenches
$41.89 – $43.45The T-handle hex wrench is an ideal way to tighten and loosen button-head cap screws and socket-head cap screws. The handle has a cushion grip and the long arm (approx. 7 1/8″ arm / 9″ total w/handle) provides access to hard to reach areas. The end of the hex wrench is ball-shaped which allows for…
-
EX-AL™ T-Nuts, Fasteners and End Caps
$0.59 – $16.29EX-AL™ Various T-Nuts, Fasteners and End Caps T-nuts allow joining plates, panels, hinges, and other accessories to be bolted into the T-slot of any of the extrusions. They are made of hardened steel and are coated with corrosion-resistant black oxide. Standard T-nuts slide into the T-slot from the end. The drop-in style allows the T-nut…
-
Flywheel Rotation Sign
$19.78Flywheel Rotation Sign for Visual Danger Attention The Flywheel Rotation Sign for Visual Danger Attention are danger signs for flywheel rotation. Includes arrow pointing to flywheel danger.
-
Foot Switch Signs (KSC055-KSC055S-KSC055F)
$35.70The Foot Switch Signs and Labels are designed for visual awareness and are available in English, Spanish and French.
-
Function-Testing Checklist for Light Curtains (LLL055)
$18.23Light curtains should be function-tested often using the function-testing checklist at every setup, operator change, and shift change, as well as every time after maintenance is performed. This light curtain function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine….
-
Function-Testing Checklist for Perimeter Barrier Guards (LLL059)
$18.23This checklist can be used to function-test perimeter barrier guards. This should be done at every setup, operator, and shift change, as well as every time after maintenance is performed. The checklist is laminated and has a grommet in the corner so it can be attached to the barrier guard. The function-testing procedures are on…
-
Function-Testing Checklist for Point-of-Operation Barrier Guarding (LLL058)
$18.23Barrier guards should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This point-of-operation barrier guard function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine. The checklist has the function-testing…
-
Function-Testing Checklist for Pullback Devices (LLL060)
$18.23Pullback devices should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This pullback device function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine.
-
Function-Testing Checklist for Restraint Devices (LLL065)
$18.23Restraint devices should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This restraint device function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine.
-
Function-Testing Checklist for Two-Hand Control and Two-Hand Trip
$18.23Before operating a machine with two-hand control or two-hand trip, function tests should be done to make sure that the safeguard is adjusted and working properly. These tests should be done at every setup, operator, and shift change, as well as every time after maintenance is performed. This two-hand control and two-hand trip function-testing checklist…
-
Danger Signs for General Machinery Danger
$35.70General Danger Signs for All Machinery are designed to alert of machine danger. Signs available in English, Spanish and French.
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2024. All Rights Reserved By Rockford Systems LLC
