Category: Safeguarding Devices
Showing 49–72 of 104 results
-
Guard-Opening Scale – OSHA (KSC097)
$62.07An OSHA guard opening scale is a valuable tool to use during the design, installation, and inspection of guards to make sure they comply with OSHA’s Table O-10. This folding guard opening scale is based on Table O-10 of OSHA 29 CFR 1910.217 for mechanical power presses. It shows the distances that guards shall be…
-
EX-AL™ Hairpin Clip Assembly for Perimeter Guarding (FKT753)
$7.77The Hairpin Clip Assembly for Perimeter Guarding (FKT753) is designed for holding the hairpin ends and are essential in appropriate hairpin assembly.
-
Hazardous Voltage Warning Labels
$19.78The Hazardous Voltage Warning Labels, Visual Safety Technique are designed to be eye-catching and alert to the hazardous voltage in the work space.
-
-
-
Light Curtain (Beam) Off-On Remote Operator Station (LLD1236)
$377.10An off-on remote operator station is available that is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes an off/on keyed selector switch in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.
-
Light Curtain Floor Stand (KTR077)
$912.48This is a non-stock item and may incur an extended delivery time.
-
Light Curtain Interface for Point of Operation (EZ) Light Curtains
$834.88 – $3,230.91The EZ-Screen light curtain interfaces are available in several variations. They are available with the components furnished loose, in a plain door enclosure, or in an enclosure with the operators on the door. Depending on the requirements, component options include terminals, fuses, a safety monitoring relay, force-guided relays, a light curtain off/on selector switch, a…
-
Light Curtain Mirrors For Light Curtains
$633.15 – $2,243.95Light curtain mirrors can be used with the light curtain to protect more than one side of the point of operation or work envelope. The mirrors for light curtains can help protect two, three, and even four sides of the point of operation or perimeter area. They are usually mounted on a 45-degree angle at…
-
Light Curtain Off-On With Reset Remote Operator Station (LLD1238)
$519.86The light curtain off-on with reset remote operator station is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes an off/on keyed selector switch and a light curtain reset button in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.
-
Light Curtain Reset Remote Operator Station (LLD1237)
$338.30The light curtain reset remote operator station is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes a light curtain reset button in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.
-
Light Curtain Test Rods for Light Curtain Systems
$57.43Light curtain test rods for light curtain systems must be used to test the light curtain after each setup or after any maintenance work is performed. A test rod is included with each shipment of a light curtain system.
-
-
Low-Voltage Articulated Palm Button (CTC751)
$1,610.80This heavy-duty, low-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
-
-
-
Maximum Load Safety Block Label (KST330)
$20.57The Maximum Load Safety Block Safety Label (KST330) is designed to be a visual warning of a maximum load to alert persons in the work place.
-
Milling Machine Belt Cover (KYL021J)
$282.44This unique patented milling machine belt cover is made of durable cast aluminum. The hinged covers are sold in pairs for the right and left sides and are permanently attached to the machine. Spindle speed changes are done quickly and efficiently by simply pulling down the belt cover. OSHA requires under 29 CFR 1910.219 that…
-
Milling Machine Draw Bar Cover (DBC001)
$180.03This Draw Bar Cover (part #DBC001) protects vertical mill workers from rotating shafts below 7 feet off the ground. It guards the turning draw bar with a non-rotating, smooth, welded-steel enclosure, secured firmly to the mill with a powerful ring magnet and safety anchor chain. Simple to install, the draw bar cover prevents clothing, hair…
-
Danger Signs for Moving Saw Blades (KSC058-KSC058S-KSC058F)
$35.70These visual safety tools are to raise awareness of the danger of moving parts on machinery. Signs are available in English, Spanish, and French. Ex. “You are exposed to moving machine parts that will result in loss of fingers if placed in the machine.”
-
Non-Locking Safety Switches—Metal Housing
$689.02 – $797.64These tamper-resistant safety switches can be used to interlock hinged, sliding, or lift-off guards. Closure of the guard or latch causes the actuator to enter the switch and release the dual anti-tamper locking cams. The actuator allows the main center cam to rotate and make the switch contacts. When opening the guard or latch, the…
-
Non-Adjustable Floor Stand for Control Bar or Palm Button Assembly (KCL000)
$1,495.97This 37″ nonadjustable heavy-duty floor stand includes a top plate and a 4″ x 4″ column. The base has four holes for permanent attachment to the floor; bolts are not furnished.
-
Notice For Metal-Forming Machinery (KSC033)
$35.70This safety tool is used to raise awareness of the dangers of metal-forming machinery in the workplace.
-
Operator Safety Signs (Cutting/Turning KSC048-KSC048S-KSC048F and Forming/Fabricating KSC000-KSC000S)
$35.70Cutting/Turning and Forming/Fabricating Specific Operator Safety Signs are available in English, Spanish and French. Ex. “Never place your hands in this machine.”
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2024. All Rights Reserved By Rockford Systems LLC
