Archives: Shop
Showing 265–288 of 310 results
-
Warning Label for Rotating Gears and Pulley (KST181)
$19.78Rotating Gears and Pulley Danger Labels (KST181) are designed to raise awareness of the dangers with rotating gears and pulleys. Ex. “You are exposed to moving machine parts that can crush, dismember, and cause death.”
-
Rubber Panel Gasket 10SERIES (GSKT10)
$0.55The rubber gasket tightly holds the poly-carbonate panels in the T-slot of the extruded aluminum. This gasket is made of high-grip rubber and is easily inserted into the T-slot after the panel is assembled in the frame. Poly-carbonate panels (3/16″-thick) are secured with the gasket on one side of the panel. The gasket material is…
-
Safety Bumper
$670.40 – $1,466.47This safety bumper system is designed to protect someone or something from hazardous machine conditions. A safety bumper and a safety interface control provides a Category 3 safety system. The bumper is an industrial grade, pressure-sensitive safety device with a built-in sensor, and is supplied with 4-lead wiring. When a person or object comes in…
-
Safety Bumper Control Interface (RKR164)
$2,990.38The safety bumper control interface (Part No. RKR164) consists of a safety controller, power supply, force-guided relays, terminals, and fuses all inside an enclosure for bumper switches. An on/off selector switch and a lighted reset push button are on the front of the enclosure. If the safety bumper is pressed and stops machine motion, then…
-
Safety Distance Guide Slide Chart (LLL050)
$27.16This slide chart calculates the safety distance for mounting two-hand trip, two-hand control, and presence-sensing devices on machinery.
-
-
Safety Mat Junction Boxes
$1,199.58 – $1,477.34Safety Mat Junction Boxes with Easy Tie-In for Grouping up to 10 safety mats. Part No. RKR-021 Mat junction box can provide wiring for up to 10 mats for easy tie-in to the mat control. (Cover has been removed for photo.) If multiple mats are grouped together to provide auxiliary or perimeter (work-envelope) safeguarding, junction…
-
Self-Ejecting Lathe Chuck Wrenches
$394.16 – $504.34Lathe chuck wrenches help prevent one of the most common accidents on lathes: when a chuck wrench (or key) is thrown from the chuck. This happens when someone forgets to remove the chuck wrench from the chuck before the machine is turned on. A self-ejecting, spring-loaded chuck wrench can be used on lathes or other…
-
Sensing-Saf-Start®
$600.57 – $774.36Power Interruption Immune, Sensing-Saf-Start® Package The Sensing-Saf-Start® package is designed for installation on 120-V (15-A maximum) machines. When installed correctly, the Saf-Start® package will prevent the machine from automatically or unintentionally restarting when a power interruption occurs. The machine cannot restart until power has been restored, the machine has been turned off, and the reset…
-
-
Single-Phase Nonreversing Magnetic Motor Starter, 2 HP Max (CSF301)
$1,319.05The 115VAC, 30A non-reversing magnetic motor starter, self-latching red emergency-stop palm button, green motor control on push button and red motor control off push button are housed in a NEMA 12 enclosure. Enclosure size is 8″ x 6″ x 6″. It can be used for machines with 115VAC power and is rated up to 2…
-
Single-Phase Starter With Self-Latching Emergency-Stop Button, 1/2 HP Max (CSF082)
$600.57The 115VAC, 20A non-reversing magnetic motor starter, self-latching red emergency-stop palm button, green motor control on push button and red motor control off push button are housed in a NEMA 4 polycarbonate enclosure. Enclosure size is 5″ x 5″ x 4″. It can be used for machines with 115VAC power and is rated up to…
-
-
-
Slim Line Non-Locking Safety Switches
$336.74 – $446.92Tamper-resistant safety switches can be used to interlock hinged, sliding, or lift-off guards. Closure of the guard or latch causes the actuator to enter the switch and release the dual anti-tamper locking cams. The actuator allows the main center cam to rotate and make the switch contacts. When opening the guard or latch, the actuator…
-
Solenoid Locking Safety Interlock Switches
$1,359.41 – $1,657.36Kit includes switch, actuator, and conduit adapter. Locking switches are designed to prevent accidental or deliberate access while the machine is in motion. The mechanical locking feature is ideal for machines that have to finish a sequence, a program, or coast to a stop before the interlocked guard can be opened. The switches allow the…
-
Spring-Loaded, Self-Ejecting, Safety Turnover Bars
$336.74 – $533.84Spring-loaded turnover bars are most frequently used with mechanical power presses. Turnover bars can also be used on four-slides or any other machine where the bar might be sent into the air if it is inadvertently left in the bar ring hole and the machine is turned on. Each spring-loaded turnover bar is self-ejecting so…
-
Spring-Loaded/Self-Ejecting Drill Press Chuck Keys
$54.30 – $276.22Use the chart below to select your drill press chuck key. These drill press chuck keys are spring-loaded and self-eject so they are not inadvertently left in the drill’s chuck. Drill Press Chuck Keys – Pilot Size Selection Chart
-
Standard-Mount Grinder Shields
$277.78 – $893.86Bench grinder shields are designed to minimize the debris and hazards associated with bench grinders and buffers. These standard-mount grinder shields are available in various sizes for protection from the swarf of bench or pedestal grinders. The frames are constructed of reinforced fiber nylon or heavy cast aluminum. Each shield is furnished with a threaded…
-
Standard Palm Button Assemblies
$1,702.37 – $2,192.74Two-Hand Control, Standard Palm Button Assemblies To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with ring guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be…
-
Standard-Voltage Articulated Palm Button (CTC746)
$1,528.55The heavy-duty, standard-voltage articulated palm button provides 1 NO and 1 NC contact arrangement. This 2 3/4″ chrome button comes with a guard, gasket, and four screws. This palm button can be used instead of the standard palm button when a lighter push or a more ergonomic button is required. The force required to operate…
-
Steel Bases for Die Safety Blocks
$332.10 – $395.72This steel safety block base can be added to U-shaped, octagonal-shaped, and X-shaped safety blocks. The base adds stability to help prevent the die block from tipping over. Available in 1/2″-thick steel. To learn more about die blocks, we invite you to read our blog post “Demystifying Die Safety Blocks.” Aluminum safety block bases are…
-
Straight Rigid In-Line Actuator (CMC546A)
$80.70Actuators must NEVER be used to bypass or otherwise defeat the protective functions of the safety switch.
-
Super-Grabber Vacuum Lifter (KMK055)
$76.03The four-finger grip and larger cup provide extra lifting capacity. Its larger diameter makes this lifter ideal for greater loads. Breaks oil adhesions easily. It also has specially designed release tabs. Lifts about 12 pounds. 4 3/4″ diameter cup.
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2024. All Rights Reserved By Rockford Systems LLC
