Category: Press Brake Control Systems
Showing 1–24 of 41 results
-
Foot Switch Orange (CTD088)
$828.12Keeps operators hands free from machinery by using cast-iron foot switches, designed for use on machinery with proper “Point of Operation” and “Pinch Point” guarding devices in place. This foot switch is protected from unintentional operation. A die-cast cover protects the top and both sides, and the front is protected by a hinged flap. The…
-
-
-
Modular Emergency Stop Control System – Patch Cords
$126.18 – $182.74The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Modular Emergency Stop Control System – Wired Push Button Station
$511.96 – $603.34The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
Adjustable Floor Stand for Control Bar or Palm Button Assembly (KCL017)
$1,139.94The adjustable column (28″ to 47″) on this floor stand can easily be moved up and down for operator comfort. A hand tool is required to make adjustments. The base has four holes for permanent attachment to the floor; bolts are not furnished. Custom heights are available. Please consult the factory.
-
Articulated Palm Button Assemblies
$2,356.75 – $3,096.41To meet OSHA and ANSI safety requirements, the two run/inch buttons must be protected against accidental operation (with guards) and they must be separated to require the use of both hands to operate them. They must also be mounted at the proper safety distance if they will be used as a point-of-operation safeguard. These palm…
-
Chrome, Light-Push Button (CTC737)
$572.87This heavy-duty, light-push, single plunger run/inch palm button provides 1 NO and 1 NC contact arrangement. This 2 1/2″ button is constructed of zinc cast and has a flat plunger. The palm button cover plate has a solid neoprene gasket which provides an oil-tight seal upon installation. This palm button can be used instead of…
-
Stop-Time Measurement (STM) Device Complete (DCL100)
$14,582.88Complete STM including meter, transducer, cable extension set, actuator, flag, legs, and plunger extension. This is a non-stock item and may incur an extended delivery time.
-
Remote Tachometer Assembly (DCL101)
$2,894.82Optional remote tachometer assembly (for reciprocating machines that stop beyond bottom or top, and for machines with relatively slow rotating or linear motion). For STM (Stop-Time Measurement) Device
-
N.O. Manual Start Switch (DCL102)
$388.69The N.O. Manual Start Switch is designed to be compatible with a large variety of practical machinery application needs.
-
Dual-Solenoid Air Valves for Mechanical Power Presses and Press Brakes
$2,240.72 – $8,491.57These monitored dual solenoid air valves are ideal to use on mechanical power presses and other potentially hazardous machinery that utilize a pneumatically controlled clutch and brake mechanism. Each valve has two valve elements independently controlled by two solenoid pilots. The two valve elements share common inlet, outlet, and exhaust ports. When the pilot valves…
-
-
Cable and Push-Button E-Stop Assembly (CML510)
$1,393.74CML510 Assembly Includes:
• Cable and Push-Button E-Stop Switch
• Indicator Light and Bulb
• 7 Yards of Red PVC-Covered Steel Cable
• Tension Kit -
-
Flywheel Rotation Sign
$18.49Flywheel Rotation Sign for Visual Danger Attention The Flywheel Rotation Sign for Visual Danger Attention are danger signs for flywheel rotation. Includes arrow pointing to flywheel danger.
-
Foot Switch Yellow (CTD011)
$1,232.76Keeps operators hands free from machinery by using die-cast foot switches, designed for use on machinery with proper “Point of Operation” and “Pinch Point” guarding devices in place. This foot switch is protected from unintentional operation. A die-cast cover protects the top and both sides, and the front is protected by a hinged flap. The…
-
Function-Testing Checklist for Restraint Devices (LLL065)
$17.04Restraint devices should be function-tested at every setup, operator, and shift change, as well as every time after maintenance is performed. This restraint device function-testing checklist can be used for this. It is laminated and has a grommet in the corner so it can be kept at the machine.
-
Function-Testing Checklist for Two-Hand Control and Two-Hand Trip
$17.04Before operating a machine with two-hand control or two-hand trip, function tests should be done to make sure that the safeguard is adjusted and working properly. These tests should be done at every setup, operator, and shift change, as well as every time after maintenance is performed. This two-hand control and two-hand trip function-testing checklist…
-
-
-
Light Curtain Interface for Point of Operation (EZ) Light Curtains
$780.26 – $3,019.54The EZ-Screen light curtain interfaces are available in several variations. They are available with the components furnished loose, in a plain door enclosure, or in an enclosure with the operators on the door. Depending on the requirements, component options include terminals, fuses, a safety monitoring relay, force-guided relays, a light curtain off/on selector switch, a…
-
Light Curtain Mirrors For Light Curtains
$591.73 – $2,097.15Light curtain mirrors can be used with the light curtain to protect more than one side of the point of operation or work envelope. The mirrors for light curtains can help protect two, three, and even four sides of the point of operation or perimeter area. They are usually mounted on a 45-degree angle at…
-
Light Curtain Off-On With Reset Remote Operator Station (LLD1238)
$485.85The light curtain off-on with reset remote operator station is used in conjunction with an interface when a plain door enclosure or loose interface components are chosen. This remote operator station includes an off/on keyed selector switch and a light curtain reset button in a steel 3 1⁄2-inch x 3 1⁄4-inch x 2 3⁄4-inch enclosure.
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
5795 Logistics Parkway
Rockford Illinois 61109
1-800-922-7533
customerservice@rockfordsystems.com
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2023. All Rights Reserved By Rockford Systems LLC
