Category: Products
Showing 1–24 of 231 results
-
-
Ejection Curtain Guarding Kits for Presses
$3,725.50 – $4,522.45Ejection Curtain Guarding Kits for Presses are designed for organizations that require a superior hydraulic press safety solution to help protect their employees and prevent injuries caused by flying, rolling or sliding debris. Most commonly used on H-presses or compacting presses that are hydraulic powered, the ejection curtains are coiled-wire fabric machine guards, widely used…
-
Foot Switch Orange (CTD088)
$886.09Keeps operators hands free from machinery by using cast-iron foot switches, designed for use on machinery with proper “Point of Operation” and “Pinch Point” guarding devices in place. This foot switch is protected from unintentional operation. A die-cast cover protects the top and both sides, and the front is protected by a hinged flap. The…
-
-
-
-
-
-
-
-
Protector Series Shields (RSS)
All Interlocked PROTECTOR Series Shields must be integrated into a proper motor starter that operates with a 120V coil, and requires actuation of the motor start pushbutton in order to re-start the machine after actuation of the interlock switch, or in the event of a power source failure. -
PROTECTOR™ Series Light Curtain Mirrors
$488.83 – $1,269.39NEW Protector™ Series Mirrors are used to guard the perimeter of a work cell, whereby corner mirrors can be set up to reflect the sensing field from the emitter, around the perimeter’s corners, to the receiver. Using corner mirrors is an economical way to make use of the range of a PROTECTOR Series Light Curtains…
-
-
RSSE1XR000L120
$1,165.62Shield, Curved, 12″ x 8″, Right Mount, Direct mount w/Interlock, 12″ Offset, No Enclosure
-
S3000 Safety Laser Scanner
Features Meets industry OSHA, ANSI, UL, IEC, and EN safety standards 3 models to choose from—standard, advanced, and professional Selectable resolutions—30 mm (1.18″), 40 mm (1.58″), 50 mm (1.96″), 70 mm (2.75″), and 150 mm (5.9″) 190° scanning angle Protective field scanning range radius up to 23′ (7 m) Warning field scanning range radius up…
-
Unitrol SOFT TOUCH Pinch-Point Safety System for Riveters
$8,797.35Please note this item has an extended lead time (about 4 weeks). Please call for installation quote if interested in Rockford Systems installation. The SOFT TOUCH Pinch-Point Safety System is the first and only fully passive safeguarding equipment designed to prevent a pneumatic riveter, welder or other small machine from applying full force if it…
-
-
Automatic Sanding Belt Holder
$4,158.92 – $4,861.90The automatic sanding belt holder enables lathe operators to sand, polish and deburr without using their hands for work execution, keeping hands away at a safe operating distance. The holder is available in 25mm and 50mm sizes and can hold belts of different sizes and abrasion grits. The sanding belt holder meets ISO 23125 6.2.1.P…
-
-
Sanding Belts for Automatic Sanding Belt Holder
$26.00Sanding belts for the automatic sanding belt holder enables lathe operators to sand, polish and deburr without using their hands for work execution, keeping hands away at a safe operating distance.
-
4 Maximum Padlocks, Accommodating Lock-a-Plugs
$111.73 – $122.60These lockout devices accommodate a large variety of electrical plugs. The large device (Part No. KYM-987) also locks out necked-down pneumatic male fittings commonly attached to compressed air hoses. These devices accommodate up to four padlocks with 9/32″ maximum shackle diameter. Part No. KYM-984 is for plugs up to 1 1/2″ wide, 1 1/2″ high,…
-
Modular Emergency Stop Control System – Patch Cords
$135.01 – $195.53The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
-
-
Modular Emergency Stop Control System – Terminating Cable (FDK316)
$77.59The Modular Emergency Stop Safety Control Systems are complete wiring solutions dedicated to machine safety emergency stops. These quick disconnect-based systems consist of safety wired ports and distribution boxes as well as patch cords. Specifically intended for use with dry-contact safety switches, Modular E-Stop Safety Control Systems provide flexible and reliable connections between safety E-stops…
Contact Customer Service Reach a Live Person @
Open Monday – Friday
8:00am – 5:00pm CST
Order Online Today
Let Us Help…
Our Mission
To reduce risk and prevent workplace
injuries by becoming our customer’s trusted
advisor and source for machine safeguarding
training, assessment services, and provider
of turnkey engineered safeguarding solutions.
Location
5795 Logistics Parkway
Rockford Illinois 61109
Phone
1-800-922-7533
Useful Links
Hours of Operation
Copyright 2024. All Rights Reserved By Rockford Systems LLC